To paint an RC car body: wash the inside of the clear body, mask your design, and spray polycarbonate paint on the inside in light coats, darkest color first. Back light colors with silver or white, let it dry, then peel the outer film and add decals. The mistake that ruins the most first bodies is the wrong paint. Tamiya's TS cans sit right next to its PS cans in stores and in Amazon's results, and TS flakes off Lexan.
Where this comes from
We read the pages ranking for this search on October 15, 2026: a hobby shop guide from PM Hobbycraft, Horizon Hobby's painting article (Horizon owns several RC brands and sells paint), plus Tamiya's own PS paint page and retailer copies of Tamiya's can instructions. Brand blogs tend to push their own paint, so this page is brand-neutral: Tamiya PS and Pro-Line RC Body Spray are both polycarbonate paints, and either works. Picks below are from Amazon's results the same day.
This is a How we pick page: we compared paint makers' instructions and hobby-shop guides; we didn't run our own paint tests. Always follow the instructions on your paint can. How we research.
The right paint (and the one that flakes off)
| Paint | Made for | Use on a clear RC body? |
|---|---|---|
| Tamiya PS (for example PS-1 White) | Clear polycarbonate R/C bodies, sprayed inside; resists oil and fuel | Yes. Tamiya: "Never use these paints on plastic models." |
| Pro-Line RC Body Spray | R/C bodies; listed as "extremely durable and ultra-flexible" | Yes |
| Tamiya TS (lacquer) | Plastic models (ABS and styrene) | No. "The paint will flake off," per a retailer's copy of Tamiya's description |
| Hardware-store spray paint | Wood, metal, rigid plastic | No; not made to flex with the body |
| Flat or matte paint, outside | Exterior accents | Only as a top layer; Horizon says flat or matte paints are generally the only ones for the outside |
The trap is real. Tamiya's TS-29 Semi-Gloss Black has 1,252 ratings and shows up in Amazon's "rc car body paint" results, and its own listing describes it as paint for ABS and styrene. Check the can says PS (or "polycarbonate") before you buy.
What you need
- Polycarbonate paint in your colors. Tamiya says each 100 ml PS can is "the appropriate amount for finishing the model."
- A backing color: Tamiya PS-12 Silver behind light colors, or PS-5 Black for a dark, deep finish.
- Masking: Tamiya masking tape (6, 10 and 18 mm), or liquid mask for complex shapes. Most clear bodies include window masks.
- A body reamer and curved Lexan scissors set for trimming and post holes.
- Mild dish soap and warm water, a lint-free cloth, and a hobby knife.
- Optional: Tamiya PS-31 Smoke to tint the windows.
Why you paint the inside, in reverse
From outside, you look through the clear shell at whatever paint touches it first. So the first color you spray is the one on top of the design, and every later coat sits behind it. That's why the order is reversed from painting a model, and why the darkest, masked details go on first. Light colors are thin and let darker paint behind them show through, so they get a silver or white backing.
How to paint an RC body, step by step
- Leave the overspray film on the outside. Horizon's guide says to keep it on until painting is finished; it catches overspray.
- Wash the inside with warm, soapy water to remove mold release and fingerprints, rinse well and let it dry completely. PM Hobbycraft notes leftover water causes streaks.
- Trim the body now or later. Cutting first makes masking easier; some builders paint first so the edges stay protected. Either way, sand rough cut edges lightly with 400 to 600 grit, as PM Hobbycraft suggests, so they don't crack.
- Mask the windows with the included masks, then mask your design. Lay broad areas first, then narrow strips for edges, and press every edge down firmly. Cut tape on the body with a light touch so you don't score the Lexan.
- Shake the can well. Spray the first (darkest) color inside in light coats. Tamiya says to hold the can about 30 cm from the surface; PM Hobbycraft says 10 to 12 inches. Several light coats beat one heavy one, which runs.
- Let each coat dry before the next. Tamiya's instruction is simply "after curing, apply another coat." Hold the body up to a light; when no light shows through the painted area, that color is done.
- Remove the masks for the next color and spray it the same way. Repeat for each color, dark to light.
- Back the whole inside with silver or white behind light colors, or black for a dark finish.
- Let it dry fully, peel the window masks and the outer overspray film, then ream post holes and fit the body.
- Add decals to the outside. PM Hobbycraft mists the body and decal with a little soapy water and alcohol, slides the decal into place, squeegees out the liquid and lets it sit 24 hours.
Worked example: a first two-color scheme
A white body with one black stripe is the easiest scheme that still looks custom, and it teaches the whole process. Here's the order:
| Step | Mask | Spray | Result from outside |
|---|---|---|---|
| 1 | Windows, then tape off everything except the stripe | Black, light coats | Black stripe |
| 2 | Pull the tape around the stripe; keep window masks on | White over the whole inside | White body, black stripe |
| 3 | Same | Silver backing over everything | Whiter white, no gray patches |
| 4 | Peel window masks | Optional smoke on the windows | Tinted windows |
Black over white would be the wrong way round: from outside you'd see the white first, and the black behind it would make the white look gray. Once this works, a buggy scheme with two stripes or a split color is the same idea with more tape.

Paint scheme ideas for buggies and trucks
Simple beats busy on a first body. A single bold color with a contrasting stripe down the hood reads well at speed. Splitting the body front to back (one color on the nose, another from the cab back) needs only one tape line. Fluorescent colors are easier to spot in tall grass, and they need a light backing to stay bright. For scale trucks, one plain factory-style color with tinted windows looks more real than flames. For metallic and translucent colors, check the can for the backing the maker suggests.
When a paint job goes wrong
| Problem | Likely cause | Fix |
|---|---|---|
| Paint flakes or peels | Wrong paint (TS or hardware store) or an unwashed body | Strip and repaint with polycarbonate paint on a clean body |
| Blotchy or see-through from outside | Coats too light, or no backing | Add more coats inside, then a silver or white backing |
| Colors bled under the tape | Edges not pressed down, or heavy coats | Press edges firmly next time and spray lighter; small bleeds can hide under a decal or stripe |
| Runs and drips | Heavy coats | Let it dry fully; the next color or backing often hides runs from outside |
| Paint on the outside | Overspray film removed too early | Keep the film on until you're finished |
| Body warped | Heat used to speed drying | No heat gun or hair dryer; air dry only |
To start over, PM Hobbycraft recommends a plastic-safe stripper such as Tamiya's polycarbonate body cleaner, used carefully and according to its instructions. Overusing a stripper can damage the polycarbonate.
Safety
Polycarbonate spray paint is flammable and its fumes are hazardous. Retailer copies of Tamiya's can warnings say to ventilate the room thoroughly and keep open flames and sparks away. Paint outdoors or with windows open, and follow every warning on your own can. Pro-Line's paint instructions also say not to use heat to dry.
Where to go next
If you're building your first kit, a clear body is part of the fun; our best RC car kits and RTR vs kit guides cover which ones ship clear. Painting a spare body for a basher you already own is a cheap way to make it yours, after the parts in our first upgrades for any basher and Traxxas Slash upgrades guides. A clear body plus two cans of PS paint also makes a good, cheap gift; there are more ideas in our gifts for RC car lovers.
Sources: Tamiya PS polycarbonate spray; Hobbyetc copy of Tamiya's TS description; PM Hobbycraft, How to paint RC car bodies; Horizon Hobby, How to paint RC car bodies. Checked October 15, 2026. How we research · Affiliate disclosure