BashBench
A short course RC truck on a work stand with its body off and upgrade parts laid out beside it

The best Traxxas Slash upgrades, in the order to buy them

The right first upgrade depends on which Slash you own. Traxxas's own parts lists show where the stress goes, because the pricier versions ship with the parts the cheaper ones don't.

How we pick · Updated · We earn a commission when you buy through our Amazon links.

Start with power on a brushed or 2S Slash, and with the driveline on a 3S one. A 2WD XL-5 or 4X4 BL-2s gets more from a good 2S LiPo than from any aluminum part. A Slash 4X4 VXL on 3S needs a steel spur and rear CVD driveshafts before anything shiny, because that's where 3S power ends up. The order below is by version, and every Traxxas part number comes from that truck's parts list.

How we picked the order

Traxxas doesn't publish breakage statistics, so we didn't pretend to have any. We used two signals that are on the record. The first is Traxxas's own parts lists: the Slash 4X4 Ultimate ships with aluminum hub parts (caster blocks and steering blocks, plus rear carriers) and GTR shocks with sway bars, and the 3S-rated Slash 4X4 Brushless (VX3) ships with a steel 54T spur that's an option on the VXL. When Traxxas upgrades a part on the pricier truck, it's telling you where the load goes. The second is what owners buy: in Amazon's Slash parts results on October 3, 2026, rear CVD driveshafts and shock sets each showed about 200 purchases a month, ahead of almost everything else.

Product details come from each Amazon listing, and fitment only where the listing states it. We haven't installed these parts ourselves. How we research.

Which Slash do I have?

Check the model number on the box or manual cover, or read the ESC label:

  • XL-5 with a Titan 12T 550 motor and 48-pitch gears: Slash 2WD XL-5 (58234-8)
  • BL-2s, 32-pitch: Slash 4X4 BL-2s (68154-4), 2S max
  • VXL-3s with Velineon 3500 (3 mm shaft): Slash 4X4 VXL (68386-4) or Ultimate (68277-4)
  • VX3 with V3200 (5 mm shaft) and an ESC fan: Slash 4X4 Brushless (68454-4) or 2WD Brushless (58434-4)

Older Slashes aren't on traxxas.com any more. If yours predates these model numbers, check part numbers against your own manual. Upgrades differ by drivetrain, so if you haven't bought yet, read Slash 2WD vs 4X4 first.

Upgrade order by version

VersionFirstThenSkip for now
2WD XL-5 (58234-8)2S LiPo + balance charger (turn LVD on)Big Bore shocks; LCG chassis if you run on smooth ground; BL-2s system laterAluminum hubs before the motor is brushless
4X4 BL-2s (68154-4)2S LiPo + chargerRPM arms; shocksSteel spur and CVDs, unless you break the stock ones (2S only)
4X4 VXL (68386-4)Steel spur 3956X / steel slipper setRear CVDs 9052R; fan set; aluminum hubs 9063-9065Bigger pinions until the driveline is done
4X4 Ultimate (68277-4)Steel spurRear CVDs (9052X / 6852R)Aluminum hubs and shocks (already fitted)
4X4 Brushless VX3 (68454-4)Rear CVDs 9052RRPM armsSteel spur and ESC fan (both stock)
2WD Brushless VX3 (58434-4)Rear CVDs 9052XEHD kit 9181 parts as they wearShocks (GTR in its parts list), ESC fan (stock)

The upgrades worth buying

First upgrade for a 3S Slash 4X4

Steel 6878-style slipper clutch with 54T spur and 15/17/19T pinions

The center spur is where a 3S Slash 4X4 meets its power, and Traxxas fits a steel 54T spur as standard only on the VX3 Brushless 4X4; on the BL-2s and VXL its steel spur, 3956X, is an option. This all-metal slipper assembly replaces the Traxxas 6878 slipper on the 4X4 models its listing names and uses the stock 54T size, so your gearing chart still applies.

Read the pinion details before counting on them. The listing gives a 5 mm bore with a 3.175 mm sleeve. Traxxas lists the VXL's Velineon 3500 with a 3 mm shaft, so for a VXL treat this as a spur and slipper upgrade and buy a 3 mm-bore pinion separately.

  • Fits (per listing)Slash 4X4, VXL, Ultimate, Platinum; Stampede 4X4; Rustler 4X4
  • Spur54T, 32P (0.8 metric)
  • Pinions15T, 17T, 19T, 5 mm bore with 3.175 mm sleeve
  • Materialhardened steel

Why it stands out

  • Stock 54T size, so the manual's gearing chart still works
  • All-metal slipper internals
  • 239 Amazon ratings, about 100 bought a month

Think twice if

  • You run a BL-2s on 2S and the stock spur is fine
  • You expected the included pinions to fit a VXL motor shaft
Check price on Amazon
Most-bought Slash driveline part

CVD rear driveshafts, replacement for Traxxas #6852 (pair)

Rear driveshafts were among the two most-bought Slash parts in our Amazon check, around 200 a month. Traxxas's own options are CVD sets: 9052R (rear) for the 4X4 and 9052X or 6852R for the 2WD, with the stock trucks on extreme heavy-duty plastic-and-steel shafts. This aftermarket pair is the budget route, with aluminum centers and steel axles per the listing.

  • Fits (per listing)Slash 2WD and 4x4 incl. VXL/Ultimate/Platinum, Rustler, Stampede, Hoss
  • Center6061-T6 aluminum
  • AxleQ235 carbon steel
  • Hardwareincluded

Why it stands out

  • Listing names both 2WD and 4X4 Slash models
  • Screws and nuts included

Think twice if

  • You want Traxxas parts only: buy 9052R (4X4) or 9052X (2WD)
  • The 4.0-star average (399 ratings) is the lowest on this page
Check price on Amazon
A steel CVD driveshaft being fitted to an RC truck's rear hub
CVD shafts replace the stock dogbone-style rear shafts. Traxxas sells its own as 9052R for the 4X4.
Best arms for a 4X4

RPM 80702 front/rear A-arms, Slash and Stampede 4x4

RPM arms are the classic answer to snapped plastic arms, and this listing comes with two useful details. You need two packages for a whole truck. And on the rear carriers, the upper hinge pin hole can't be used because of the strengthening design. RPM backs them with a breakage warranty and makes its molded parts in the USA, per the listing.

  • FitsSlash 4x4 and Stampede 4x4, front or rear
  • MaterialRPM nylon blend
  • Counttwo packs per truck
  • WarrantyRPM breakage warranty

Why it stands out

  • Front or rear on the Slash 4x4
  • 780+ ratings, 4.8 average
  • Breakage warranty

Think twice if

  • You own a 2WD Slash: these are 4x4 arms
  • You use the upper rear hinge pin hole for your setup
Check price on Amazon
Best shock upgrade for a 2WD

Traxxas 5862 Big Bore shock set

The genuine Traxxas option for the XL-5's stock Ultra Shocks. Traxxas includes progressive-rate springs for the 2WD Slash, and notes that other models such as the Stampede should keep their own springs. The Ultimate ships with GTR shocks and the VX3 models list GTR shocks in their parts lists, so this is mainly a 2WD XL-5 and BL-2s upgrade.

  • MakerTraxxas
  • Positionfront and rear
  • Springsprogressive rate springs for 2WD Slash included
  • Ratings1,045

Why it stands out

  • Genuine Traxxas part with Slash 2WD springs included
  • 1,000+ ratings

Think twice if

  • Your Slash already has GTR shocks (the Ultimate; the VX3 models per their parts lists)
Check price on Amazon
For a VXL on 3S

VXL-3s ESC and motor cooling fan set

The VX3 Brushless Slashes ship with an ESC fan; the VXL-3s doesn't. If you've added the 19T pinion Traxxas pairs with its 60+ mph claim, or you run long 3S sessions, a fan set for the heat sink and motor is a cheap way to keep temperatures down. The listing rates it IP44 against splashing, which is less than the "waterproof" the ESC itself is sold as.

  • Fits (per listing)Slash 4x4 VXL, Stampede/Rustler/Hoss 4x4 VXL, VXL-3s heat sink
  • Voltage5 V
  • Water ratingIP44 (per listing)
  • ConnectorJST

Why it stands out

  • Made for the VXL-3s heat sink
  • 476 ratings

Think twice if

  • You have a VX3 Slash, which already has a fan
  • You run in puddles a lot (IP44 is splash-level)
Check price on Amazon
Brushless for a 2WD XL-5

Traxxas 3382 BL-2s Waterproof Brushless Power System

The motor and ESC from the Slash 4X4 BL-2s, sold on their own. For a brushed 2WD XL-5 owner it's Traxxas's own brushless route, and it keeps the truck on the same 2S LiPo or NiMH packs. Training Mode cuts power by half for a younger or newer driver. Gearing changes with the motor, so check the 3382 instructions and your gear pitch before you install it; the XL-5 runs 48-pitch gears.

  • IncludesBL-2s ESC + brushless motor
  • Input6–7 cell NiMH or 2S LiPo
  • LVD2-stage, switchable
  • Training Mode50% power
  • BEC6.0 V, 3 A

Why it stands out

  • Genuine Traxxas power system with 2-stage LVD
  • Training Mode for new drivers

Think twice if

  • You want 3S speed: the BL-2s is 2S only
  • Your Slash is already brushless
Check price on Amazon
Best handling upgrade for a 2WD

Low-CG chassis conversion kit, 2WD Slash

A complete kit that drops the 2WD Slash's chassis 33 mm and puts the battery much lower, which is the main reason a 2WD Slash rolls over in fast corners. It's the most-rated part on this page, with 1,600+ ratings. It changes the battery hold-down too, so recheck pack fit afterwards.

  • Fits2WD Slash models
  • Lowers chassis33 mm (1.3 in)
  • Battery positionover 45% lower
  • Includeschassis, lower chassis, nerf bars, battery hold-down, retainers, front springs

Why it stands out

  • Complete kit, nothing else to buy
  • 4.8 average from 1,600+ ratings

Think twice if

  • You bash in tall grass and deep ruts, where lower clearance hurts
  • You own a 4X4
Check price on Amazon

Power upgrades come after the driveline

On a VXL, the jump from 2S to 3S is half again as much motor rpm on the same gearing, and the 19T pinion on top of that is what Traxxas's 60+ mph claim needs. Do the steel spur and rear CVDs before either. The Slash top speed page has the numbers for every version, and the top speed calculator's VXL preset shows what each pinion does. Batteries that fit the tray are on our Slash battery page. Thinking of 3S on a BL-2s Slash? Its ESC is rated for 2S only, so read what the ESC allows first.

A steel spur gear and slipper clutch on an RC truck's center drivetrain
The center spur and slipper take every hit of 3S throttle. Traxxas makes the steel 54T spur standard only on the VX3 4X4.

Smaller parts worth knowing

Four aluminum RC shocks and a bottle of shock oil
Shocks only need upgrading on Slashes with the basic Ultra Shocks. The Ultimate already has GTR shocks, and the VX3 parts lists show GTR shocks too.

Working on the truck goes faster on a stand. The aluminum rotating RC car stand lists the Slash among the trucks it fits, and it has a magnetic strip for screws. Our first five upgrades for any basher covers the tools and habits that apply to every truck. To swap the included L-wrenches for real drivers, our RC tool kit guide lists Traxxas sizes.

What to skip

Skip anything that adds power before the driveline can take it, and skip all-aluminum arms: Traxxas itself pairs aluminum hub parts with plastic arms on the Ultimate. On a 2S-only Slash (XL-5, BL-2s), skip the steel spur and CVDs until something actually breaks. Those trucks don't carry 3S power through the drivetrain.

If you only buy one thing

Brushed or 2S Slash: a good 2S LiPo. 3S VXL: the steel spur. 3S VX3 4X4 (steel spur already fitted): rear CVD driveshafts. Our Slash 4x4 review covers the truck as a whole, and the Slash vs Senton comparison covers parts support against Arrma's equivalent.

Traxxas part numbers from the parts lists and owner's manuals for models 58234-8, 58434-4, 68154-4, 68386-4, 68277-4 and 68454-4 on traxxas.com; product details from Amazon listings, checked October 3, 2026. How we research · Affiliate disclosure

Questions people ask

What is the first upgrade for a Traxxas Slash?
On a brushed 2WD XL-5 or a 4X4 BL-2s, a 2S LiPo and a balance charger change the truck more than any part. On a 3S-capable VXL or VX3, protect the driveline first: a steel spur (Traxxas 3956X) and CVD rear driveshafts are the parts Traxxas itself lists as the strong options.
What breaks most on a Traxxas Slash 4x4?
Traxxas doesn't publish failure data, so we look at two signals. Owners buy rear CVD driveshafts and shocks more than other Slash parts on Amazon (about 200 a month each in our October 3 check), and among current Slashes Traxxas fits a steel spur as standard only on the 3S VX3 4X4. Those point at the center gear and rear driveline under 3S power.
Is a Traxxas Slash 2WD worth upgrading to brushless?
If you already own one, Traxxas sells the BL-2s Waterproof Brushless Power System (3382) as a separate motor and ESC. It stays a 2S system. If you haven't bought yet, a Slash that ships brushless is usually the cheaper way to get there.
Do Slash 4x4 and 2WD upgrades interchange?
Many don't. The 2WD and 4X4 use different arms, driveshafts and gearing, and even the current 4X4s differ: the VXL's Velineon motor has a 3 mm shaft and the VX3's V3200 has a 5 mm shaft. Check the part number against your truck's parts list before ordering.
Are aluminum parts a good upgrade for a Slash?
Selectively. Traxxas puts 6061-T6 aluminum caster blocks, steering blocks and rear carriers on the Slash 4X4 Ultimate and sells them as options (9063, 9064, 9065) for the 4X4. Plastic arms flex and absorb hits, so many owners pair aluminum hubs with tougher plastic arms instead of going all-aluminum.
Does the Traxxas Slash need a cooling fan?
The VX3 Brushless trucks ship with an ESC fan. The VXL-3s ESC doesn't, and add-on fan sets for its heat sink are a common purchase for owners running 3S or taller gearing.