BashBench
A smiling young man at a garage workbench with four freshly mounted off-road RC wheels lined up in front of him

How to glue RC tires so they stay on

Most tires that peel off weren't glued badly. They were glued onto mold release. Clean first, use medium CA, band the bead, and know when a beadlock means you shouldn't glue at all.

How we pick · Updated · We earn a commission when you buy through our Amazon links.

To glue RC tires: clean both the tire bead and the wheel with isopropyl alcohol, seat the tire and foam, put a band around the tire, then lift the bead a little at a time and run medium tire CA into the channel. Do one side of every tire, let it dry, then do the other side. Wait at least 15 minutes before driving. Most peeling tires fail because glue stuck to mold release instead of rubber, so the cleaning step matters more than which bottle you buy.

Where this advice comes from

We read the guides that rank for this search on October 15, 2026: Horizon Hobby's tire gluing article (it sells Pro-Line), Axial's crawler guide, Adrenaline RC's 1/8 off-road guide and RC Car Action's "Don't come unglued", plus two RCTalk threads on gluing and removing tires. Where they disagree, we say so. The glue picks come from Amazon's tire glue results the same day, with the specs on each listing.

This is a How we pick page: we compared manufacturer and shop instructions and the listings; we didn't time cure rates or pull-test glues ourselves. How we research.

What you need

  • Tire glue: TLR Tire Glue Standard (1 oz), the most-bought RC tire glue in our search (800+ last month). Pro-Line Pro-Bond is the other big seller, with 1,680 ratings, a 3,200 PSI strength claim and reusable tips.
  • For spot repairs, a thin glue like TLR Tire Glue Thin.
  • Isopropyl or denatured alcohol and a lint-free cloth.
  • Bands to hold the bead: wide rubber bands work (Axial uses two per tire), or the purpose-made JConcepts Satellite tire gluing bands.
  • Spare applicator tips, such as the ALPENKOK 0.8 mm glue tips, which slide onto most CA bottles. Check your nozzle size first.
  • A hobby knife for flashing, and a body reamer or tire punch if your wheels aren't vented.

One warning on that Amazon search: the best seller in it is Tamiya Extra Thin Cement. That's a cement for plastic model kits. It won't bond rubber to a wheel, so leave it out of your cart for this job.

Which glue for which job

All of these are CA glues. What changes is how fast they flow, and that decides how much control you get.

JobViscosityWhyExample
Mounting new basher or short course tiresMedium / standardHorizon and Axial both recommend it: it flows like oil, so you can lay the bead down before it grabsTLR Standard, JConcepts medium
Mounting crawler tires (1.9", 2.2", micro)Medium, small dropsAxial's crawler guide uses small drops from 12 to 6 o'clock, then fills gaps at 3 and 9Pro-Line Pro-Bond
Fixing a small gap in a glued beadThinFlows like water and wicks into a tight seam by itselfTLR Thin
Racing, high-grip surfacesMedium, full beadRC Car Action warns against flexible glue for racingBSI Ultra-Cure tire glue

The BSI listing describes Ultra-Cure as a "thin, penetrating formula" in one place and "medium viscosity" in another, so expect something in between. Thick or gel CA has its fans for slow, careful work, but none of the guides we read recommends it as a default.

Cross-section of a tire bead in a wheel's glue channel The tire bead sits in a channel between the wheel's outer flange and inner lip. Glue goes into the channel under the bead, not on the outside of the sidewall. A band around the tire presses the bead into the channel while the glue cures, and a vent hole lets air out. wheel glue in channel band presses bead down vent hole flange tire + foam
The glue belongs in the channel under the bead. A band holds the bead down while it cures. Not to scale.

How to glue RC tires, step by step

  1. Vent the wheels if they aren't pre-vented. Horizon says to ream two holes on opposite sides of the wheel, because an unvented tire can over-expand and tear. On 1/8 tires, Adrenaline RC punches 3 mm holes in the inside sidewall instead: two, 180 degrees apart, for buggy tires and four for truggy tires.
  2. Clean the beads and the wheel channel. New tires and wheels carry mold release and factory oil. Wipe both with isopropyl or denatured alcohol on a lint-free cloth until nothing comes off, then let them dry. Horizon also lists Simple Green, while Axial says to avoid household cleaners like window cleaner, so alcohol is the safe common ground.
  3. Trim and fit. Cut any flashing off the bead. Closed-cell foam usually fits as is; open-cell foam may need its edges trimmed so it doesn't bunch over the flanges. Push the tire on, check the tread direction and left/right pairs, and spin the wheel to see it runs true.
  4. Band it. Put a band around the tire (Axial uses one on each side) so the bead is pushed into the channel.
  5. Glue the first side. Pull back a short section of bead, run glue into the channel, and let the bead drop back. Work around the tire in sections. Horizon says to wet the bead with ample glue; RC Car Action says just enough to wet the surfaces, since excess soaks into the foam. Aim between the two: a continuous wet line, no puddles.
  6. Check the gaps. After a few minutes, Axial looks again at the spots it glued last and adds a drop wherever the bead isn't stuck.
  7. Do one side of every tire first. Move to the second side only when the first is dry. It's faster and you won't smear wet glue.
  8. Wait before running. Adrenaline RC says at least 15 minutes. Take the bands off once the glue has set; that guide warns that leaving them on too long can ripple the tire.

An accelerator (kicker) spray makes CA set almost instantly. RC Car Action says it can give a slightly weaker bond and is for emergencies only, such as a quick fix between heats.

A girl cheering with both fists raised as an orange off-road RC truck bounces over a dirt mound, her dad grinning beside her with his arms crossed
Well-glued tires stay on when the truck lands hard. Badly glued ones peel at the first big jump.

Glue by tire type

Basher and monster truck tires take the most abuse, from hard landings and tire growth at speed. Glue the whole bead on both sides and vent. If yours keeps peeling at the same spot on a 3S or 6S truck, the problem may be power and traction pulling the bead, and an RCTalk owner suggests a beadlock wheel as the fix. Bigger trucks in our best RC monster truck guide put the most strain on a glued bead.

Crawler tires run slowly, and their soft compounds and foams are what owners tune. Axial's guide uses small drops and checks every quarter turn. Some crawlers ship on real beadlocks (the Redcat Ascent-18 APEX listing specifies 1.3-inch beadlocks), so check before you reach for glue. See the best RC crawler tires for which tires come mounted and which come loose, and our TRX-4M upgrades for micro wheel options.

On-road and short course tires are often sold pre-mounted. If you're buying the tires our Traxxas Slash upgrades page recommends, they come pre-mounted on Traxxas beadlock-style wheels, so there's nothing to glue unless one lets go.

When not to glue: real beadlocks

A true beadlock wheel clamps the tire's bead between the wheel and a ring held by small screws. No glue goes on it, and gluing ruins the main benefit, which is swapping tires and foams with a hex driver. Wheels sold as "beadlock-style" only copy the look with a decorative ring. Those still need glue. If the ring has no screws through it into the wheel, treat it as a normal glue-on wheel.

How to fix a tire that came unglued

  1. Peel back only the loose section. If more than about a quarter of the bead is loose, it's usually cleaner to remove the tire and start again.
  2. Scrape off old, flaky glue with a hobby knife and brush out the debris with an old toothbrush, the way RC Car Action describes.
  3. Clean the gap with alcohol on a cloth and let it dry fully.
  4. Band the tire, lift the bead slightly and run thin CA into the gap so it wicks along the channel. Press the bead down and hold it.
  5. Let it cure as long as you can before running. Yellowish, crusty excess glue usually means mold release was left behind, according to Adrenaline RC, so clean harder next time.

A tire that comes loose in the same place again and again is telling you something. Either the wheel channel was never clean, or the truck has enough power and grip to pull the bead.

Removing glued tires

RCTalk owners describe soaking the wheel and tire in acetone in a covered, ventilated container, for several hours up to about a day, until the glue lets go. Take the foam out first if you can: one owner warns acetone soaks into foam inserts and they harden. Others mention boiling or baking the tires. We'd keep CA-coated parts out of the kitchen oven and cookware.

Do you need a tire gluer or jig?

A tire gluer or jig is a stand that holds the wheel while you lift the bead with one hand and glue with the other. It's handy if you mount a lot of race tires. For a set of four basher tires, a few wide rubber bands and a steady bench do the same job, which is how both Axial and Horizon show it.

Safety with CA

Work with airflow, keep CA off your skin and out of your eyes, and follow the warnings on your glue's label. Adrenaline RC notes that wiping CA with some cloths can make it smoke; don't breathe it. Keep acetone and accelerator sprays capped and away from heat.

Next step

Glue is one of the cheapest fixes on a basher. If you're working through a new truck, our first five upgrades for any basher puts tires near the top, and our Arrma Granite upgrades names tire sets that suit 3S power. Rather skip the glue? Our best RC truck wheels and tires include pre-glued sets, sorted by hex size.

Sources: Horizon Hobby, How to glue RC tires; Axial, How to glue tires; Adrenaline RC, 1/8 off-road tires; RC Car Action, Don't come unglued; RCTalk threads on gluing and removing tires. Checked October 15, 2026. How we research · Affiliate disclosure

Questions people ask

What glue do you use for RC tires?
A hobby CA (cyanoacrylate) glue sold as tire glue, in medium or standard viscosity. Horizon Hobby and Axial both recommend medium because it flows like oil and gives you a few seconds to work. TLR Standard, Pro-Line Pro-Bond and JConcepts medium are common choices.
Can I use regular super glue on RC tires?
Household super glue is also CA, and it can hold in a pinch, but tire glues are sold with the viscosity and applicator tips that make the job clean. RC Car Action recommends hobby-brand glue over store brands. Don't use plastic cement like Tamiya Extra Thin Cement; it's made for styrene model kits, not rubber.
Thin or medium CA for RC tires?
Medium for mounting new tires, thin for spot repairs. Thin CA wicks into a tight seam on its own, so it suits a small gap in an already glued bead. Medium gives you time to pull the bead back and lay it down evenly all the way around.
How long should tire glue dry before running?
Adrenaline RC's guide says to let the tire sit at least 15 minutes before running. Axial says to let one side dry completely before doing the other. Giving them overnight costs nothing if you're not in a hurry.
Do you glue RC tires on beadlock wheels?
No. A true beadlock clamps the tire bead between the wheel and a screwed-on ring, so it doesn't need glue, and gluing defeats the point of being able to swap tires. Wheels sold as beadlock-style only look like beadlocks and still need glue.
How do you get glued RC tires off the wheels?
Owners on RCTalk soak the wheel and tire in acetone in a covered, ventilated container for several hours to about a day until the glue lets go. Pull the foam first if you can, because acetone soaks into foam inserts and they harden when they dry.