For a 2.8-wheel truck like a Stampede or Rustler, buy Pro-Line's Badlands MX28 for dirt and its belted Trencher HP if the truck is brushless. Short course owners on 12 mm hex should start with a cheap pre-glued set, and 1/8 monster trucks on 17 mm get Pro-Line's belted Badlands MX38. Before any of that, check your truck's rim size and hex, then the offset. Crawler owners want our crawler tire guide instead; this page covers bashers and monster trucks.
Quick picks
| Best 2.8 all-terrain tire | Pro-Line Badlands MX28 2.8, mounted on Raid 6x30 wheels (PRO1012510) | Amazon |
|---|---|---|
| Best belted 2.8 for brushless trucks | Pro-Line Trencher HP 2.8 belted, mounted on Raid 6x30 wheels (PRO1016810) | Amazon |
| Best budget 2.8 set | RC Station 2.8 wheels and tires, 12 mm hex | Amazon |
| Best budget short course set | FriHobby pre-glued short course wheels and tires, 12 mm hex | Amazon |
| Best 1/8 monster truck tire | Pro-Line Badlands MX38 HP 3.8 belted, mounted 17 mm (PRO1016610) | Amazon |
| Best budget 17 mm set | Pre-glued 1/8 monster truck wheels and tires, 17 mm hex | Amazon |
| Best for on-road speed | Arrma dBoots Hoons 42/100 2.9 belted, mounted (ARA55062) | Amazon |
| Best paddles for sand and snow | Traxxas 3689 Stampede paddle tires, pre-glued (pair) | Amazon |
How we picked
We searched Amazon for RC truck wheels and tires, belted tires, Pro-Line monster truck tires and paddle tires on Oct 21, 2026, then pulled the full listing for every set below. Sales and rating history did the first cut; RC Station's 2.8 set had 100+ bought last month with 506 ratings, for example. Fitment comes only from the listing or the maker's parts page, and for Pro-Line we used Horizon Hobby's parts lists to see which hex adapters come in the box. We haven't run these tires ourselves. How we research.
Fitment first: rim size, hex and offset
Every product post we read sells the tire and skips the fitment. Get the fit right and almost any tread works.
Rim size
The number in a tire's name is the bead diameter of the wheel it fits, in inches. A 2.8 tire goes on a 2.8 wheel. It isn't the tire's height: RC Station's 2.8 set is 4.97 in tall. AMain's sizing notes cover the common basher sizes: 1/10 buggies and stadium trucks run 2.2 wheels, and short course wheels are listed as 2.2/3.0 because they have a 2.2 in outer bead and a 3.0 in inner bead. The 2.8 class fits Stampede and Rustler-type trucks, 3.8 is the 1/8 monster truck size, and Arrma's 1/7 on-road Hoons are 2.9.
Hex size
The hex is the six-sided drive on the end of the axle; measure it across the flats with the wheel off, or read your manual. AMain calls 12 mm the industry standard for 1/10 and lists 17 mm for 1/8 buggies and trucks. Arrma uses 14 mm on some 1/10 trucks. On a 1/8 truck, a stripped plastic hex is a common failure, which is why removable hexes (below) are worth having.
Offset
Offset is the distance from the hub mounting surface to the wheel's centerline. More offset sets the wheel farther out and widens the truck, which helps it resist rollovers. An RCTalk poster says a 1/2 in offset makes a truck about one inch wider, and another warns that extra offset loads up the arms and knuckle bearings. Pro-Line handles this with removable hexes: its 2.8 Raid sets come with 12 mm narrow, 12 mm wide and 14 mm adapters, and its Trencher HP 3.8 set with zero-offset and 1/2 in offset 17 mm adapters, according to Horizon's parts lists. AMain says newer 1/8 truck and truggy wheels are 17 mm with zero offset.
What common trucks take
| Truck | Hex | Wheel size | Fits (per listing or maker) |
|---|---|---|---|
| Traxxas Slash 2WD and 4x4 | 12 mm | Short course 2.2/3.0 | Pre-glued SC set |
| Traxxas Stampede, Rustler, Hoss | 12 mm | 2.8 | RC Station 2.8; Traxxas 3689 paddles (Stampede rear) |
| Arrma Granite GROM | 12 mm | 1.85 | Pro-Line Badlands MX 1.85 |
| Arrma 1/10 Granite MEGA 665, older Granite 3S | 14 mm | 2.2/3.0 | Arrma Fortress MT; see our Granite upgrades |
| Arrma Big Rock 3S | Check your manual | RC Station's 2.8 listing says it does not fit | |
| Traxxas Maxx, Sledge, E-Revo 2.0, Summit; Arrma Kraton 4S/6S, Outcast, Notorious 6S | 17 mm | 1/8 monster truck | Budget 1/8 MT set; Traxxas 8979 belted Sledgehammer (Maxx) |
| Arrma Infraction and Limitless (1/7) | 17 mm | 2.9 | dBoots Hoons 42/100 |
Fitment comes from each product listing (checked Oct 21, 2026) plus Arrma's Granite parts listings. Versions change, so check your own manual when a listing and your truck disagree.
Belted vs unbelted, and when it matters
Tires stretch as they spin. On a brushed truck it barely matters. On a brushless truck at full throttle, an unbelted tire grows taller and thinner, the contact patch shrinks and the truck gets twitchy; a tire that grows also changes your gearing, which our top speed calculator shows in numbers. A belt stops that. Pro-Line's listing says its belted Trencher HP "will not balloon or expand at high speed." Unbelted tires are cheaper and their softer carcass flexes over bumps, which is fine on a 2S truck. Rule of thumb: brushless on 3S or more, go belted.
Pre-mounted or glue your own
Pre-mounted sets come glued, with foam inserts in place, and bolt straight on. Every pick below is pre-mounted. Gluing your own lets you pair any tire with any wheel and costs less once you own spare wheels, but a bad glue job peels at speed. If you go that way, here's how to glue RC tires so they stay on.
The best RC truck wheels and tires
Pro-Line Badlands MX28 2.8, mounted on Raid 6x30 wheels (PRO1012510)
Pro-Line's motocross-style tread is built for loose and muddy dirt, and it's the 2.8 Pro-Line set with the longest rating history in our search (411 ratings). The removable hex is the useful part: the three adapters in the box let the same wheel run narrow or wide on a 12 mm truck, or on 14 mm. Two tires per pack, so a full set is two packs.
- Wheel2.8 in Raid, black
- Hexremovable, 12 mm narrow, 12 mm wide and 14 mm adapters (Horizon parts list)
- Tread depth12 mm
- Pack2 tires
Why it stands out
- Three hex adapters for offset and fitment
- Deep tread for loose dirt
Think twice if
- You run on pavement; the lugs wear fast there
- You need four in one box
Pro-Line Trencher HP 2.8 belted, mounted on Raid 6x30 wheels (PRO1016810)
The belted version of a classic all-terrain tread, for a brushless Stampede or Rustler-class truck that balloons stock tires. The listing says the tire "will not balloon or expand at high speed," and the H-shaped tread is pitched at side-to-side stability. Its 3.8 rating over 245 reviews is the weakest of the Pro-Line sets here, so read recent reviews before buying.
- Wheel2.8 in Raid
- Beltmolded-in herringbone weave
- Hexremovable, 12 mm narrow, 12 mm wide and 14 mm adapters
- Pack2 tires
Why it stands out
- Belted for high-speed runs
- Same removable hex system
Think twice if
- Lower rating than its unbelted cousin
- Your truck is brushed; the belt isn't worth paying for
RC Station 2.8 wheels and tires, 12 mm hex
The best-selling 2.8 set in our search (100+ bought last month, 506 ratings), with four tires per pack. The listing names its fits and one that doesn't: it says it is not compatible with the Arrma Big Rock 3S. It also asks you to tighten the wheel nuts with proper tools so the plastic hex doesn't wear. Good spares for a brushed truck or a kid's first hobby truck.
- Wheel2.8 in
- Hex12 mm
- Outside diameter4.97 in
- Width2.8 in
- Pack4, pre-glued
- Fits (listed)Traxxas Rustler, Stampede, Hoss 2WD and 4x4 VXL; Redcat Volcano EPX, S30, Blackout XTE
Why it stands out
- Full set of four, pre-glued
- Clear fit list on the listing
Think twice if
- Unbelted; balloons on fast brushless trucks
- Plastic hex wears if the nut is loose
FriHobby pre-glued short course wheels and tires, 12 mm hex
Short course owners go through tires fastest, and this four-pack (100+ bought last month) is the cheap way to keep a spare set in the box. The listing gives full sizes and a long fit list, and it includes locknuts and a cross wrench. If your short course truck uses a 14 mm hex (some Arrmas do; check the manual), look at Arrma's own dBoots Fortress SC with 14 mm hex instead (382 ratings).
- Outside diameter110 mm (4.33 in)
- Width45 mm
- Hex12 mm
- Pack4, foam inserts, locknuts and wrench
- Fits (listed)Traxxas Slash 2WD, 4x4, VXL, BL-2S; Redcat Blackout SC; Losi 22S SCT, Tenacity; Team Associated SC10; HPI Jumpshot SC
Why it stands out
- Four tires with foams, plus nuts and a wrench
- Long, specific fit list
Think twice if
- Generic tread; not a race tire
Pro-Line Badlands MX38 HP 3.8 belted, mounted 17 mm (PRO1016610)
The belted, 1/8-size version of the Badlands tread, in Pro-Line's soft M2 compound, for 17 mm monster trucks that make real power. The listing says the belt lets you "put the power down." Removable hexes mean a stripped hex is a cheap fix. For a hard-pack and grass tread instead, Pro-Line's Trencher HP 3.8 belted (263 ratings) comes with both zero-offset and 1/2 in offset 17 mm adapters.
- Wheel3.8 in Raid 8x32
- Hex17 mm, removable
- Beltmolded-in herringbone weave
- CompoundM2 (soft)
- Pack2 tires
Why it stands out
- Belted for 4S to 6S trucks
- Soft M2 compound
Think twice if
- Two per pack, so a set costs real money
Pre-glued 1/8 monster truck wheels and tires, 17 mm hex
A four-pack of 17 mm monster truck tires for the price of two Pro-Lines. Amazon showed 10K+ bought last month on our check, which we can't square with only 49 ratings; the listing may pool variants. The fit list is long and specific. Unbelted, so treat it as a spare set or a set for grass and dirt, not speed runs.
- Outside diameter150 mm (5.9 in)
- Width80 mm
- Hex17 mm, 12 mm axle hole
- Pack4, foam inserts
- Fits (listed)Traxxas Maxx, WideMaxx, Summit, E-Revo 2.0, Sledge; Arrma Kraton 4S/6S, Outcast, Notorious 6S; Redcat Kaiju; HPI Savage Flux
Why it stands out
- Four tires per pack
- Long fit list across Traxxas and Arrma
Think twice if
- Unbelted
- Short rating history
Arrma dBoots Hoons 42/100 2.9 belted, mounted (ARA55062)
Arrma's belted street tire is the direct fit for the Infraction and Limitless and has 957 ratings, the most of any belted set in our search. The listing gives the full bead sizes (3.27 in inner, 2.95 in outer), so you can check fit on other 17 mm cars. The wider Hoons 53/100 had 700+ bought last month.
- Wheel2.9 in, 5-spoke nylon
- Hex17 mm
- Diameter100 mm (3.94 in)
- Width43 mm
- Fits (listed)Arrma 1/7 Infraction and Limitless
Why it stands out
- Direct fit for Arrma's 1/7 street cars
- Belted, with a long rating history
Think twice if
- Your truck lives on dirt
Traxxas 3689 Stampede paddle tires, pre-glued (pair)
Paddles turn a 2WD Stampede into a sand and snow truck, and these are Traxxas's own, glued with foams, listed for the electric Stampede's rear wheels. Run them on the rear only and keep stock fronts for steering. For 12 mm trucks without a Traxxas option, the AMORIL paddle set (four tires, 140 ratings, 50+ bought last month) is the budget pick, and Pro-Line's Dumont 2.8 sand/snow comes with a removable hex.
- Wheel2.8 in All-Star, black chrome
- Treadfull-width paddle rib
- Foam insertsyes
- Fits (listed)Traxxas Stampede electric rear (TSM rated)
Why it stands out
- Maker fit for the Stampede
- Pre-glued with foams
Think twice if
- A pair for one axle only
- Useless on grass or pavement

Comparison table
| Set | Size | Hex | Belted | Per pack | Best for |
|---|---|---|---|---|---|
| Pro-Line Badlands MX28 | 2.8 | 12 / 14 mm | No | 2 | Loose dirt |
| Pro-Line Trencher HP 2.8 | 2.8 | 12 / 14 mm | Yes | 2 | Brushless 2.8 trucks |
| RC Station 2.8 | 2.8 | 12 mm | No | 4 | Budget spares |
| FriHobby SC | SC | 12 mm | No | 4 | Slash and SC trucks |
| Pro-Line Badlands MX38 HP | 3.8 | 17 mm | Yes | 2 | 4S to 6S monster trucks |
| Budget 1/8 MT | 1/8 MT | 17 mm | No | 4 | Cheap 1/8 spares |
| Arrma Hoons 42/100 | 2.9 | 17 mm | Yes | 2 | 1/7 on-road |
| Traxxas 3689 paddles | 2.8 | Traxxas | No | 2 | Sand, snow |
Pick by where you drive
| Where you drive | Tread | Our pick |
|---|---|---|
| Loose dirt, mud, a backyard track | Tall lugs, motocross-style | Badlands MX28 or MX38 |
| Grass and hard-pack, high speed | Belted all-terrain | Trencher HP, 2.8 or 3.8 |
| Pavement and parking lots | Belted street tread | dBoots Hoons |
| Sand, snow, shallow water | Paddles (rear) | Traxxas 3689, AMORIL, Pro-Line Dumont |
| Just need spares | Whatever fits | RC Station, FriHobby, budget 1/8 set |
Before a water run, read whether your RC car is actually waterproof; paddles make shallow water tempting.
Where tires fit in your upgrade list
Tires are second on our first 5 upgrades for any basher, right after a spare battery and charger, because nothing else changes how a truck drives for the money. Slash owners can see the rest of the list in our Traxxas Slash upgrades, and Granite owners in our Arrma Granite upgrades. If your truck is a monster truck and you haven't bought one yet, our monster truck guide lists the tire size each one runs.
If you buy one set, buy belted tires for a brushless truck and pre-glued spares for a brushed one, and measure your hex first.
Sources: AMain Hobbies RC tire and wheel sizing notes; Horizon Hobby parts lists for Pro-Line PRO1012510, PRO1016810 plus PRO1015510; RCTalk thread on Revo hex and wheel sizes (2008); Amazon listings checked October 21, 2026. How we research · Affiliate disclosure