BashBench
A small 1/18 scale crawler articulating over rocks with brass parts visible on its chassis

Best TRX-4M upgrades, in the order that pays off

Bearings and a spare battery before shiny aluminum. Here's the upgrade order for the TRX-4M, which parts fit the High Trail versus the standard trucks, and how to place weight so it actually climbs better.

How we pick · Updated · We earn a commission when you buy through our Amazon links.

Buy a spare battery and a bearing kit first. They're the cheapest changes and they help on every run. Then metal axle gears and steel driveshafts, so the parts that carry torque stop being the weak link. Weight down low comes next, and it does more for climbing than most aluminum. Leave the servo and shocks, and the brushless swap, until you know how you like to crawl. New to the platform? Start with the Traxxas TRX-4M review for the four versions and what differs.

How we picked these upgrades

We started from what TRX-4M owners actually buy: Amazon's TRX-4M upgrade searches on October 3, 2026, where INJORA shocks and steel driveshafts each showed around 300 purchases in the past month. Then we checked each part against Traxxas's TRX-4M manuals and parts lists, which name the stock parts and Traxxas's own upgrade part numbers. Fitment claims come from each Amazon listing. Ranking is by payoff per dollar and by how much each part protects the rest of the truck. We haven't installed these parts ourselves; this is a how we pick page. How we research.

Which TRX-4M do I have?

Check the model number on the box or manual cover. It decides which driveshafts fit.

  • Standard (97074-1 Bronco, 97054-1 Defender): 155 mm wheelbase, 202 mm steel rails, 2.2" tires, 29 mm ground clearance.
  • High Trail Edition (97044-1 F-150, 97064-1 K10): 162 mm wheelbase, 220 mm rails, factory long-arm lift, 2.4" Mickey Thompson tires, 40 mm clearance.

Shared by all four: Titan 180 87-turn motor, ECM-2.5, 2065T servo, GTM oil shocks, 750 mAh 2S battery. No version has portals from the factory. Source: Traxxas product pages and parts lists.

The upgrade order at a glance

OrderUpgradeWhy it's hereTraxxas part
1Second batteryMore driving per trip, nothing else changes2821 (750) or 2822 (1000 mAh)
2Ball bearingsStock bushings add drag and need extra care after wet runs9745X
3Metal axle gearsTorque-carrying gears; Traxxas recommends them with the brushless system9779
4Steel center driveshaftsVersion-specific; steel instead of the stock assemblies9751 steel (155 mm); 9852 series (High Trail)
5Low weightBrass skid, hubs or hex extenders bring the center of gravity downNone in the kit
6Crawl gearing40.3:1 low range for slower, smoother climbs9791R / 9776R
7ServoMore steering force for bigger tires and weight2065R
8Shocks, tires, brushlessTuning, once you know your terrain9764, 9871, 6250

Battery first because a dead pack ends more trail days than a broken part. Our TRX-4M battery guide covers the stock 750 mAh pack, the 1000 mAh 2822 and the plug question.

Change the order for how you crawl

Trail drivers who cover distance in the yard or on hikes should follow the table as written: bearings and a spare battery give the most time on the trail. Comp-style crawlers who spend their time on a single rock should move weight and crawl gearing up to second and third (our crawler course ideas scale down to 1/18 trucks). Low range gives finer control at a walking pace, and brass down low keeps the nose planted on climbs. Scale builders can skip the gearing entirely and spend on lights, a bed rack and tires that look right.

For any style, the general list in our first five upgrades guide still applies: spare parts for what you break, and a few tools. Micro hardware needs micro drivers; see RC tool kits for micro crawlers.

The best TRX-4M upgrades

Best first upgrade

INJORA 22-piece sealed bearing kit for TRX-4M

The TRX-4M ships with self-lubricating bushings. Traxxas's own manual tells you to spray them with water-displacing oil after wet runs and to service them more often, which is the bushing's weakness in one line. INJORA's kit swaps in 22 sealed stainless bearings and says it covers every bearing position on the truck. Traxxas sells a black rubber-sealed kit too (9745X) if you'd rather stay in the family.

  • Pieces22
  • Materialstainless steel
  • Sealssealed, dustproof
  • Replacesstock bushings
  • Coverageall bearings for TRX-4M (per listing)

Why it stands out

  • Cheapest drivetrain upgrade there is
  • Sealed, so grit stays out
  • One kit covers the whole truck, per the listing

Think twice if

  • You don't want to pull hubs and the transmission apart: the install touches most of the drivetrain
Check price on Amazon
Best insurance for the axles

Traxxas 9779 metal axle gears

The stock axle ring and pinion is Traxxas part 9777, and the parts list shows a metal version, 9779, as the step up. It's the one Traxxas itself recommends with the 6250 brushless system. If you plan heavier tires, brass weights or more motor, these are the gears that take the extra load, so they go in before any of that.

  • BrandTraxxas
  • Includes2 axle ring gears, 2 axle pinion gears
  • Fitsfront and rear TRX-4M axles
  • Part9779

Why it stands out

  • Genuine Traxxas part, no fitment guessing
  • Covers both axles in one package

Think twice if

  • You run the truck stock and gently; plastic gears may outlast your interest
Check price on Amazon
Best driveshafts for standard trucks

INJORA steel center driveshafts (Bronco and Defender)

This set is for the 155 mm-wheelbase trucks only, and INJORA says so: "Not Compatible with TRX4M High Trail K10 F150." The D-shaped holes are there for a tighter fit on the transmission and axle outputs. INJORA also notes it can't guarantee fit on other brands' axle gears, so pair it with stock or Traxxas gears. Traxxas's own steel version is 9751.

  • Materialstainless steel
  • FitTRX-4M Bronco, Defender
  • Not forHigh Trail K10, F-150
  • EndsD-shaped and rounded-rectangle holes

Why it stands out

  • Clear fitment note on the listing
  • Stainless, so it won't rust after puddles

Think twice if

  • You own a High Trail; buy the version below
Check price on Amazon
Best driveshafts for High Trail

INJORA hardened steel driveshafts (High Trail)

The High Trail's longer chassis needs longer center shafts (Traxxas lists 9855 as the stock High Trail shafts, with a 9852 series as alternatives). This is INJORA's hardened-steel set for the K10 and F-150, and it was one of the best-selling TRX-4M parts on Amazon this month. In-phase joints matter on a crawler because they keep the shaft from adding a vibration at full articulation.

  • Materialhardened steel
  • FitTRX-4M High Trail K10, F-150
  • Designin-phase
  • EndsD-shaped and rounded-rectangle holes

Why it stands out

  • Made for the High Trail's length
  • Hardened steel, in-phase design

Think twice if

  • You own a Bronco or Defender: it won't fit
Check price on Amazon
A brass skid plate and brass hubs under a small crawler chassis
Weight belongs low and slightly forward: under the transmission and at the front wheels, not on the body.

Weight: where it helps and where it hurts

A crawler climbs better when its center of gravity is low, and better again when a little more of the weight sits on the front axle, because the nose is what wants to lift on a steep face. Weight on the axles and skid helps. Weight up on the body, a roof rack full of accessories or a big battery mounted high works against you, because it raises the center of gravity and makes the truck tip on side-hills.

The brass parts below put mass in the right places. Don't stack everything at once. Add one piece, test on the same climb, then decide.

Best weight upgrade

INJORA brass skid plate and transmission mount

Fifty-three grams under the transmission is about the lowest place on the truck you can add weight. It also replaces the plastic skid, so it protects the gearbox when you high-center on a rock. INJORA notes you can swap driveshafts without pulling the gearbox, a small thing you'll appreciate if you do the driveshaft upgrade above.

  • Materialbrass, black coating
  • Weight53 g
  • Replacesplastic skid/transmission mount
  • Bonusdriveshafts change without removing the gearbox

Why it stands out

  • Weight exactly where it does the most good
  • Tougher than the plastic it replaces
  • Coated against corrosion

Think twice if

  • You mostly drive fast on grass, where extra weight just slows the truck down
Check price on Amazon

For weight at the wheels, INJORA's 10 mm brass hex hub extenders add brass at all four corners and push the wheels out 6 mm per side. The listing also claims they stop the front tires hitting the steering link. They fit the TRX-4M and the whole Ascent-18 family, per the listing.

Crawl gearing: the 40.3:1 option

Traxxas sells three single-speed TRX-4M transmissions: high range (trail) at 16.6:1, which is stock, low range (crawl) at 40.3:1, and speed at 9.7:1, plus a two-speed with 32.7:1 and 9.9:1. Low range gives roughly two and a half times the reduction of stock, so the truck crawls slower and with more control at the same throttle. Two compatibility notes straight from Traxxas: the portal kit 9843R doesn't work with the 9776R crawl gears, and the two-speed doesn't either.

An opened small crawler transmission with steel gears
Grease the gears on assembly. INJORA's own listing ends with "Don't forget to grease the gears!!!"
Best for slow, technical crawling

INJORA 40.3:1 stainless transmission gear set

Same reduction as Traxxas's 9776R crawl set, in stainless steel. It includes every gear in the transmission and an 11-tooth motor pinion, so you rebuild the gearbox in one go. Choose this or portals, not both, since Traxxas says the two aren't compatible.

  • Ratio40.3:1
  • Materialstainless steel, CNC machined
  • Includesall transmission gears + 11T motor pinion
  • FitsTRX-4M Defender, Bronco, K10 High Trail, F-150

Why it stands out

  • Fits all four TRX-4M versions, per the listing
  • Full gear set including the pinion

Think twice if

  • You want portal axles
  • You like trail speed; top speed drops a lot
Check price on Amazon

If you'd rather not open the gearbox, INJORA also sells a 180 Pro 48T brushed motor pre-assembled with a 40.3:1 transmission as a drop-in unit for all four versions.

Steering and suspension

Best servo upgrade

INJORA INJS2065 7 kg servo for TRX-4M

The stock 2065T already has a metal main gear and 45° of steering, so you don't need a servo on day one. You start to want one after adding brass and stickier tires, which ask more of the steering. This one is sold as a drop-in with a metal mount and horn. INJORA lists stainless gears and an IP66 rating. Traxxas's own step up is the 2065R metal-gear servo.

  • Torque7 kg (per name)
  • Gearsstainless steel
  • Water ratingIP66 (per listing)
  • Includesmetal mount and servo horn
  • FitsTRX-4M Defender, Bronco, K10 HT, F-150

Why it stands out

  • Metal mount and horn included
  • IP66 waterproof rating, per INJORA
  • Large owner base (887 ratings)

Think twice if

  • You haven't added weight or bigger tires yet: the stock servo is enough
Check price on Amazon
Best shock upgrade

INJORA 59 mm threaded oil shocks for TRX-4M

These are long-travel threaded shocks with brass lower rod ends and threaded bodies for quick preload changes. Know what you're buying: Traxxas sets the stock GTM shocks to 51 mm between rod-end balls, and these extend to 59 mm, so they'll change ride height and articulation. That's the point for most buyers. Before swapping, try Traxxas's spring options (9757 to 9760) and shock oil; they're cheaper ways to tune.

  • Length42 mm compressed, 17 mm travel
  • BodyCNC aluminum, threaded
  • Rod endbrass
  • Spring45 mm
  • Weight8 g each

Why it stands out

  • Threaded preload adjustment
  • Brass lower ends add a little low weight
  • One of the top-selling TRX-4M parts this month

Think twice if

  • You want stock geometry: these are longer than the stock shocks
Check price on Amazon
Small sealed bearings next to a disassembled crawler axle
Bearings go in at the wheels and the transmission. Do one corner at a time so parts don't get mixed up.

Side-by-side

UpgradeFitsWhat it changesSkill
Bearing kitAll versionsLess drag, less wet-weather careMedium
Traxxas 9779 gearsAll versionsStronger axle gearsMedium
Steel shafts (standard)Bronco, DefenderSteel center shaftsEasy
Steel shafts (High Trail)K10, F-150 HTSteel center shaftsEasy
Brass skidAll versions53 g low weight, skid protectionEasy
40.3:1 gear setAll versionsSlower, finer crawlingMedium
7 kg servoAll versionsMore steering forceEasy
59 mm shocksAll versionsLonger travel, adjustable preloadEasy

Fitment as stated on each Amazon listing. Traxxas part numbers from the TRX-4M parts lists.

Tires and the rest

Stock tires are 2.2 × 1.0" on the standard trucks and 2.4 × 1.0" Mickey Thompsons on the High Trail. A softer compound helps on smooth rock. INJORA's 1.0" S5 compound crawler tires with silicone inserts are sold for the TRX-4M and SCX24; the silicone inserts are meant to hold the tire's shape better than foam. Our crawler tire guide explains compounds and inserts.

Two Traxxas-only upgrades are worth knowing about. The 9843R portal kit adds clearance and track width, and the 6250 brushless system (3350 kV) is Traxxas's answer to the brushless Ascent-18. Both cost more than everything else on this page combined. If you're thinking of moving up a size instead, our TRX-4 review compares the 1/10 truck with the TRX-4M.

Upgrades and water

Traxxas's manual says the TRX-4M is "designed with water-resistant features to protect the electronics", that it "should not be treated as though it is submersible or totally 100% waterproof", and that "water resistance applies only to the installed electronic components." Aftermarket parts don't change that, and an aftermarket servo or motor has only the rating its maker gives it. After a wet run, the manual's routine applies: battery out, low-pressure rinse, dry, then spray the bushings and metal parts with a water-displacing oil. Our waterproof guide compares how each brand words it.

If you only buy one thing

After the spare battery, get the INJORA sealed bearing kit. It costs the least, touches the whole drivetrain, and removes the part Traxxas's own manual singles out for extra care. Then match the standard or High Trail steel driveshafts to your truck. Still deciding between micro crawlers? See SCX24 vs TRX-4M vs Ascent-18, or the SCX24 and Ascent-18 upgrade orders.

Traxxas part numbers and stock specs from Traxxas's TRX-4M manuals and parts lists; product details from Amazon listings, checked October 3, 2026. How we research · Affiliate disclosure

Questions people ask

What is the first upgrade for a TRX-4M?
A second battery, then ball bearings. The stock truck runs self-lubricating bushings, and Traxxas sells its own sealed bearing kit (9745X). Bearings are cheap, they reduce drag in the drivetrain, and you replace parts you'll otherwise service after wet runs anyway.
Do TRX-4M High Trail parts fit the standard Bronco and Defender?
Not everything. The High Trail has a longer 162 mm wheelbase on 220 mm rails, so its center driveshafts are different (Traxxas 9855 versus 9755 for the 155 mm trucks). Aftermarket driveshafts are sold separately for each, so check the listing for High Trail or Bronco/Defender before buying.
Should I put portals on my TRX-4M?
Traxxas makes a portal kit, 9843R, with a 2.56:1 reduction. Traxxas says it adds over 10 mm of center ground clearance and 9 mm of track width, and that it isn't compatible with the 9776R low-range (crawl) gears. Pick one of those two paths.
Is the brushless upgrade worth it on a TRX-4M?
Traxxas's 6250 brushless system (3350 kV motor and a 3-channel ECM) claims up to 50% more speed and more crawling torque. It's the most expensive upgrade here, and Traxxas recommends its 9779 metal axle gears with it. Do bearings and gears first.
What servo should I put in a TRX-4M?
The stock 2065T has a metal main gear and direct steering. Traxxas's own step up is the 2065R metal-gear servo. Aftermarket servos such as INJORA's 7 kg INJS2065 are sold as drop-ins with a metal mount and horn.
Is the TRX-4M waterproof after upgrades?
Traxxas's manual calls the TRX-4M water-resistant, says it shouldn't be treated as submersible, and that the water resistance applies only to the installed electronics. An aftermarket servo or motor carries whatever rating its own maker gives it, so check before you drive through a creek.