BashBench
A 1/18 scale crawler with portal axles climbing a rocky creek bank

Redcat Ascent-18 upgrades: the order, the parts and when to stop

The Ascent-18 already has portals and metal gears, so the upgrade list is shorter than on other micro crawlers. Here's what's worth buying for the brushed, brushless, Scout II and APEX versions.

How we pick · Updated · We earn a commission when you buy through our Amazon links.

Start with a spare battery and steel center driveshafts, then add brass low on the axles. That's most of the job. The Ascent-18 ships with portal axles and metal gears on an aluminum chassis, which are the upgrades other micro crawlers spend money on. After that, change the portal gears only if you want more speed or more crawl, and stop before you've spent the price of the next model up.

How we picked

We read Redcat's product pages and user manuals for all four Ascent-18 versions on October 3, 2026, including the parts pages where Redcat lists its hop-ups. Then we checked the Ascent-18 parts selling on Amazon that day; the APEX steel driveshafts led at about 300 a month. Every spec below is from the Amazon listing or Redcat's own documents. We haven't installed these parts ourselves; this is a how we pick page. How we research.

Which Ascent-18 do I have?

VersionMotorESC and batteryWheelbase
Ascent-18 (brushed)RC180 brushed2-in-1, 2S LiPo only; 750 mAh 2S, JST plug155 mm
Ascent-18 Brushless3450 kV 1212 outrunnerR3C-BL, 2S LiPo only; 750 mAh 2S, JST155 mm
Scout II Brushless3450 kV 1212 outrunnerR3C-BL, 2S LiPo only; 750 mAh 2S, JST155 mm
Ascent-18 APEXHobbywing 3500 kV 1621WP-Mini24, 2S or 3S; 3S 200 mAh pack156 mm

All four have portal axles, the HX-M4K 4 kg metal-gear servo and a 14+ age warning. The APEX adds a carbon-fiber low-center-of-gravity chassis and wider portals. Sources: Ascent-18, Ascent-18 Brushless and APEX product pages and their manuals. Redcat's site lists the Scout II only as a brushless model.

The upgrade order

OrderUpgradeWhy
1Spare 2S battery (3S for APEX)The 750 mAh pack (200 mAh on the APEX) ends sessions early
2Steel center driveshaftsVersion-specific; metal in place of the stock shafts
3Brass at the wheels and axlesLower center of gravity, better climbing
4Portal or transmission gearsTune speed versus crawl; optional
5Links and skid in brassMore low weight and clearance
StopBrushless conversion of a brushed truckCosts much of the gap to the Brushless model

The battery advice applies to every crawler, and our guide to SCX24 vs TRX-4M vs Ascent-18 compares the three stock packs; pack and plug details are in the SCX24 battery guide and the TRX-4M battery guide. Redcat's manuals say to charge at no more than 1C ("2000Mah pack = 2 amp charge rate") and never inside the vehicle.

Redcat's own hop-ups, by part number

Redcat lists these in its Ascent-18 manuals, and its page says metal hop-ups are available for most of the truck. Use them if you want factory fit:

  • Brass: outer portal boxes RER30175, servo holder RER30176, diff covers RER30179, upper links RER30279, wheel hexes RER30380, center skid RER30383.
  • Aluminum: servo holder RER30177, diff covers RER30180, upper links RER30280, shock bodies RER30381 or RER30382, center skid RER30384, servo horn RER30479.
  • Steel: transmission gear set RER39670, listed as "Low Range Transmission Gears 20.52:1" in the Scout II manual.
  • APEX only: inner portal box in brass RER42155, steel driveshafts RER42159, aluminum link set RER42160.

The aftermarket picks below cover the same ground, mostly from INJORA, whose listings state fitment by version.

The best Ascent-18 upgrades

Best first upgrade (non-APEX)

INJORA stainless center driveshafts for Ascent-18

The center shafts carry every bit of torque from the transmission to the axles, so they're the first part to make metal. This set lists every 155 mm Ascent-18 version by name and includes the screws. Stainless means a wet trail won't leave rust on them.

  • Materialstainless steel
  • FitsAscent-18, Ascent-18 Brushless, Scout II, Scout II Brushless
  • Includesmounting screws
  • Ratings296

Why it stands out

  • Clear fit list for all non-APEX versions
  • Screws included

Think twice if

  • You own an APEX: buy the set below
Check price on Amazon
Best first upgrade (APEX)

INJORA stainless driveshafts for Ascent-18 APEX

The APEX's longer 156 mm chassis needs its own shafts, and this was the best-selling Ascent-18 part on Amazon in our check, at about 300 a month. In-phase joints cut drivetrain vibration at full articulation. Redcat's factory equivalent is RER42159.

  • Materialstainless steel
  • Designin-phase
  • FitsAscent-18 APEX only
  • Ratings143

Why it stands out

  • Made for the APEX
  • In-phase design
  • Top seller in our research

Think twice if

  • You own any other Ascent-18 version
Check price on Amazon
Stainless steel crawler driveshafts next to the originals
Shafts first, because they carry all the torque. Check the version on the listing; the APEX is different.

Brass weight

Weight low and toward the front keeps a crawler's nose down on steep climbs. On the Ascent-18 the best spots are the wheel hexes and the axles, then the links and skid. Add one part at a time and test on the same climb. Need a climb to test on? Build a backyard one with these RC crawler course ideas.

Best weight at the wheels

INJORA 10 mm brass hex hub extenders

The one brass part on this page that fits every Ascent-18 version, APEX included. You get weight at all four corners and a wider track, and the listing says they also stop the front tires hitting the steering link. With 666 ratings it's the most reviewed part here.

  • Materialbrass
  • Size10 mm hex, +6 mm per side
  • FitsAscent-18, Brushless, Scout II, Scout II Brushless, APEX, TRX-4M
  • Ratings666

Why it stands out

  • Fits all four versions
  • Wider, more stable stance

Think twice if

  • Your wheels already sit near the body; the extra width can rub on some bodies
Check price on Amazon
Best brass on the axles

MEUS Racing brass diff covers for Ascent-18

Small and cheap, and right on the axle housings. Fourteen grams isn't much, but it sits at the lowest point of the axles. Read the fit note: the listing says it isn't suitable for the APEX or the Scout. Redcat's own brass diff covers are RER30179.

  • Materialbrass
  • Weight7 g each, 14 g pair
  • FitsAscent-18
  • Not forAPEX, Scout (per listing)

Why it stands out

  • Low, centered weight on both axles
  • Also protects the diff gears

Think twice if

  • You own an APEX or a Scout II
Check price on Amazon
Brass hubs and diff covers on a small crawler axle
Brass at the hubs and on the diff covers keeps weight as low as it can go on a portal truck.

Gearing: portals and transmission

Portal axles put a gear pair at each wheel, so you can change the final ratio without touching the motor. INJORA's set gives the numbers plainly: 14/23T gears don't change speed, 15/22T overdrive gears raise it about 12%, and 13/24T underdrive gears cut it about 11%. Redcat's APEX manual lists its own portal gear set, RER31798, with 13T/15T/22T/24T gears.

An opened portal axle housing showing small gears
Each portal box holds a small gear pair. Changing them shifts top speed by roughly a tenth in either direction.
Best gearing change

INJORA steel overdrive and underdrive portal gears

Overdrive is for trail drivers who find the stock truck slow. Underdrive is for slow, technical crawling with finer throttle control. Some comp crawlers run overdrive up front and stock in the rear so the front wheels pull. One caution from the listing: the 15/22T overdrive gear doesn't fit with INJORA's own black brass steering knuckle and front outer portal housing.

  • Materialstainless steel
  • Ratios14/23T (stock speed), 15/22T overdrive (+~12%), 13/24T underdrive (-~11%)
  • Fitsfront or rear Ascent-18 axle

Why it stands out

  • All three ratios in steel
  • Clear speed change figures on the listing

Think twice if

  • You've fitted INJORA's brass knuckles and want overdrive
Check price on Amazon

For the transmission, Redcat's steel gear set RER39670 is listed as a 20.52:1 low range in the Scout II manual. The Scout II page also mentions "underdrive gear options".

Side-by-side

UpgradeBrushed / Brushless / Scout IIAPEXEffect
Center driveshaftsYesNoMetal center shafts
APEX driveshaftsNoYesMetal shafts, in-phase
Brass hex extendersYesYesWeight at wheels, wider track
Brass diff coversAscent-18 only (not Scout)No14 g on the axles
Brass linksNoYes36 g low, more clearance
Portal gearsYesCheck listing±11–12% speed

Fitment as stated on each Amazon listing. "Check listing" means the listing says "1/18 Redcat Ascent-18" without naming the APEX.

When to stop

The Ascent-18's selling point is that it arrives with the expensive bits already done. Portal axles and metal gears are stock, on an aluminum chassis (carbon on the APEX). The part that isn't is the power system on the brushed truck, and converting it means a new brushless motor plus a new ESC and receiver. Redcat sells the Brushless and Scout II with exactly that setup (3450 kV, R3C-BL), so if you haven't bought yet, buy the brushless version and skip the conversion.

The same thinking applies to the APEX. It already has the carbon chassis and brass in the portal boxes. Shafts and links are worth it; past that, you're tuning for competitions, not fixing weaknesses. For the rest of Redcat's lineup, see our Redcat brand guide and the Redcat lowrider guide. Thinking about a bigger Axial instead? The Axial crawler lineup compared runs from the SCX30 to the SCX6.

About water

Redcat's pages call one part waterproof: the "4kg Metal Gear Waterproof Servo". Neither the product pages nor the manuals give the ESC or the truck a water rating. Some Amazon listings for the Ascent-18 Brushless say "waterproof electronics" and "Waterproof ESC", but Redcat's own pages don't, so we'd go with the maker. Keep it out of deep water and dry it after wet runs. Our waterproof guide compares the brands.

If you only buy one thing

Buy the steel center driveshafts for your version: the INJORA set for the non-APEX versions, or the APEX set. Then the brass hex extenders, which fit every version. For general crawler tires, see the best RC crawler tires. Comparing with other micro crawlers? The TRX-4M and SCX24 upgrade orders are on their own pages, and our beginner crawler guide covers what to buy first.

Redcat specs and part numbers from Redcat product pages and user manuals; product details from Amazon listings, checked October 3, 2026. How we research · Affiliate disclosure

Questions people ask

What are the best first upgrades for the Redcat Ascent-18?
A second battery, then steel center driveshafts and brass weight low on the axles. The Ascent-18 already comes with portal axles, metal portal and ring gears and a 2 mm aluminum chassis, so the classic micro-crawler upgrades that other trucks need are mostly done.
Do Ascent-18 upgrades fit the APEX?
Some do, some don't. Redcat says the APEX is 'compatible with most Ascent-18 hop-up parts', but it has a carbon chassis, wider portal axles and a 156 mm wheelbase. Driveshafts and links are sold separately for the APEX, and some brass parts list it as not compatible, so check each listing.
Can I put a 3S battery in the Ascent-18?
Not in the brushed, brushless or Scout II versions: Redcat's manuals say their ESCs only accept 2S LiPo. The APEX is different; its Hobbywing WP-Mini24 ESC accepts a single 2S or 3S LiPo, and it ships with a 3S 200 mAh pack.
Is the Redcat Ascent-18 waterproof?
Redcat's product pages call only the servo waterproof ('4kg Metal Gear Waterproof Servo'). Neither the pages nor the manuals give a water rating for the ESC or the truck, even though some Amazon listings say 'waterproof ESC'. Treat it as not waterproof.
Should I upgrade my brushed Ascent-18 to brushless?
Redcat sells the Ascent-18 Brushless and Scout II with a 3450 kV motor and R3C-BL ESC, so it's possible. Converting means a new motor and a new ESC/receiver, which costs much of the gap between the two trucks. If you haven't bought yet, buy the brushless version.
What gears can I change on the Ascent-18?
Two places: the portal gears at the wheels and the transmission. INJORA sells steel portal gear sets in stock-speed, overdrive (about 12% faster) and underdrive (about 11% slower) ratios. Redcat lists a steel low-range transmission gear set, RER39670, at 20.52:1.