Do the free mods first. On current SCX24s, Axial's manual says to set the ESC to forward/reverse with no brake for crawling, and the stock motor came with a spare 11T pinion. Then buy weight: brass at the wheels and under the chassis does more for climbing than anything shiny on top. Tires next, then a driveshaft matched to your wheelbase. Motors and brushless kits are last, because they cost the most and change the truck the most. Still deciding which micro to buy? Our SCX24 vs SCX30 comparison covers size and parts.
Quick picks
| Best first weight upgrade | Brass 13 g wheel weights with 7 mm hex extenders | Amazon |
|---|---|---|
| Best low weight under the chassis | INJORA brass skid plate for SCX24 | Amazon |
| Best tire and wheel upgrade | INJORA brass 1.0" beadlock wheels with S5 tires | Amazon |
| Best driveshaft for 132 mm trucks | INJORA steel center driveshaft (132 mm wheelbase) | Amazon |
| Best shock upgrade | INJORA 40 mm big bore aluminum oil shocks | Amazon |
| Best brushed power upgrade | INJORA 050 50T brushed motor with complete transmission | Amazon |
| Best brushless kit | INJORA MBL32 G2 brushless ESC with 2204 motor | Amazon |
How we picked
We read the Axial manuals for every SCX24 body Axial lists, which name the stock electronics and gearing, plus Axial's own optional brass parts with their weights. Then we pulled Amazon's best-selling SCX24 upgrades on October 3, 2026. Shocks led at about 400 purchases in the past month, followed by brass skids and steel driveshafts at about 200 each. Every spec in the cards comes from the Amazon listing. We haven't installed these ourselves; this is a how we pick page. How we research.
Which SCX24 do I have?
Two things decide fit: the electronics generation and the wheelbase.
- Electronics. AX-4 transmitter with the AE-6 ESC (Deadbolt, 1967 C10, B-17 Betty); Horizon HRZ00014 transmitter (2019 JLU, first Gladiator, first Bronco); Spektrum SLT2 transmitter with a 10 A 2-in-1 ESC (current JLU, Gladiator, Bronco, Power Wagon, 4Runner, Base Camp, 1967-72 C10).
- Wheelbase. About 132 mm on the JLU, C10s and Bronco, plus the 4Runner and Base Camp (Deadbolt and Betty 133.5 mm); 155 mm on the Gladiator and Power Wagon.
Constant across all of them: Dynamite 88T 030 motor with a 10T pinion on a 55T spur, AS-1 micro servo, 350 mAh 2S LiPo. Sources: the box lists and spec tables in each Axial SCX24 manual and product page.
Step 1: the free mods
The current Spektrum 2-in-1 ESC has a mode jumper. Axial's wiring diagram labels "Forward/Reverse, no Brake" as "Recommended for crawlers", and "Forward/Brake/Reverse" as "Not recommended for crawlers." In brake mode the truck needs a stop before it will reverse, which is the opposite of what you want when you're backing off a rock. Moving one jumper costs nothing.

The second free change is gearing. The Dynamite 88T motor ships with both a 10T and an 11T pinion, and the 10T is stock on a 55T spur. The 11T is a little faster and a little less torquey. Crawl with the 10T; switch to the 11T if you mostly drive trails. Axial's wet-weather advice runs the same way: a smaller pinion or bigger spur adds torque and motor life in mud and water.
Step 2 onward: the order that pays off
| Order | Upgrade | What it does |
|---|---|---|
| 1 | Spare battery | More driving per session. See our SCX24 battery guide. |
| 2 | Brass weight at the wheels | Lowers the center of gravity where it matters most |
| 3 | Brass skid | More low weight, protects the transmission |
| 4 | Tires | Grip on smooth rock; wider stance with offset wheels |
| 5 | Steel center driveshaft | Tighter fit, metal instead of the stock shafts |
| 6 | Oil shocks | Smoother, tunable suspension |
| 7 | Motor and transmission, or brushless | More speed and control; most expensive step |
Why weight comes before everything shiny
An SCX24 weighs between about 5.6 and 11.5 oz depending on the body, per Axial. At that weight, a few grams in the right place change how it climbs. Low and forward is the rule: on a steep face the front end wants to lift, and mass on the front axle keeps it planted. Weight up high does the opposite, so skip heavy roof racks if you care about climbing.
Axial sells its own brass, with weights in the manual: diff cover 6.5 g, hex hubs 1.0 g each, knuckles 12.5 g a pair, knuckle weights 5.2 g and 9.2 g, servo mount 9.0 g and rear upper link mount 1.5 g (parts AXI302001 to AXI302006). The aftermarket parts below follow the same idea. To feel what each change does, drive the same few obstacles before and after; a 1/24 truck is the easiest to build for, and our crawler course ideas scale down to it.

The best SCX24 upgrades
Brass 13 g wheel weights with 7 mm hex extenders
Fifty-two grams at the four wheels is the cheapest climbing upgrade on the truck. The hubs also push the wheels out, so the stance gets wider and the truck resists tipping on side-hills. The listing names compatible models by Axial part number (AXI90081, AXI00001, AXI00002, AXI00004, AXI00005, AXI00006); the newer Power Wagon and 4Runner aren't on that list, nor is the Base Camp.
- Weight13 g each (4 included)
- Hex7 mm, matches stock
- Materialsolid brass
- Alsoextends track width
- FitsDeadbolt, 1967 C10, JLU, B-17 Betty, Gladiator, Bronco (per listing)
Why it stands out
- Weight right where it helps most
- Wider stance for side-hill stability
- Uses the stock 7 mm hex
Think twice if
- You drive mostly flat trails, where extra weight just costs runtime
INJORA brass skid plate for SCX24
The skid sits at the lowest point of the chassis, which makes it the second-best place for weight after the wheels. INJORA says it improves rear traction and stability over the stock part, and it protects the transmission when you high-center. One of the best-selling SCX24 parts this month, at around 200 a month.
- Materialbrass, black hard coating
- Jobskid plate, transmission protection
- FitsSCX24 Gladiator, Bronco, C10, JLU, Deadbolt (per listing)
Why it stands out
- Low weight plus protection
- Coated against corrosion
- Best-selling skid in our research
Think twice if
- Your body isn't on the fit list (the Power Wagon and 4Runner aren't named, nor is the Base Camp)
INJORA brass 1.0" beadlock wheels with S5 tires
This set does three jobs in one: softer S5-compound tires for grip, brass wheels for weight at the corners, and a -2.65 mm offset that widens the track. If you only want one bigger purchase, this is the one that changes the truck most on rock. Pair it with the wheel weights above only if you want a lot of weight down low; together they add up.
- Tires1.0", 58 × 24 mm, S5 compound
- Wheelsbrass beadlock, -2.65 mm offset
- FitsSCX24, AX24, TRX-4M, FCX24 (per listing)
- Ratings708
Why it stands out
- Grip plus weight and stance in one purchase
- Beadlock wheels, so tires can be swapped later
- Also fits the TRX-4M, per the listing
Think twice if
- You like the scale look of your truck's licensed tires

INJORA steel center driveshaft (132 mm wheelbase)
Matched to the 132 mm trucks, and the listing says so plainly ("Suit for 5.2" (132 mm) wheelbase"). Gladiator and Power Wagon owners need a 155 mm set instead. D-shaped holes give a tighter fit on the transmission and axle outputs, and the in-phase design keeps the joints from adding vibration at full articulation.
- Materialstainless steel, in-phase
- Fits5.2" (132 mm) wheelbase: JLU, C10, Bronco, Base Camp, 4Runner
- EndsD-shaped holes
- Weight17 g
- PartSCX24-151SR
Why it stands out
- Clear wheelbase fitment
- Stainless and in-phase
Think twice if
- You own a Gladiator or Power Wagon (155 mm)
INJORA 40 mm big bore aluminum oil shocks
The top seller in our SCX24 research, at about 400 purchases a month. Threaded bodies set preload, two spring rates come in the box, and they damp with real oil and bladder seals. Two catches from the listing: oil isn't included, and you add only "enough oil for a heavy coating", not a full shock body. Pick the brass lower ends if you want a bit more low weight.
- Length46.5 mm
- Travel9 mm
- BodyCNC aluminum, threaded
- Springstwo rates included
- Dampingoil (not included), bladder seals
- Lower endsnylon or brass
Why it stands out
- Adjustable preload and two spring rates
- Real oil damping
- Brass rod-end option adds low weight
Think twice if
- You don't want to buy and measure shock oil
More power: motor kits and brushless
Save these for last. They cost the most, and more speed matters less on a 1/24 crawler than weight and grip do. If you're tempted to spend that money on a bigger truck instead, compare the Axial lineup first.
INJORA 050 50T brushed motor with complete transmission
A complete drop-in: motor and aluminum-cased transmission with hardened steel gears, so you replace the whole unit rather than swapping parts. INJORA lists 25,500 rpm at 7.4 V. Axial gives the stock 88T motor's output as 4 W but no rpm, so we can't put a percentage on the gain. It stays brushed and works with the stock ESC type, which keeps the install simple.
- Motor050 size, 50T brushed
- Speed25,500 rpm at 7.4 V (listed)
- Transmissionaluminum housing, hardened steel gears
- Weight0.04 kg
Why it stands out
- Motor and transmission in one, pre-assembled
- Hardened steel gears
Think twice if
- You only crawl slowly: the stock 88T is torquey enough
INJORA MBL32 G2 brushless ESC with 2204 motor
This is the big change, and the listing is honest about what it takes: it's "Not compatible with stock 2-in-1 Receiver & ESC", so you'll need a separate receiver that works with your transmitter. In return you get a programmable brushless system that INJORA describes as smooth at low speed and much quieter than brushed. INJORA warns against flashing the firmware yourself; that voids its warranty.
- ESCMBL32 G2, AM32 firmware, programmable
- BEC6 V / 7.4 V adjustable
- Motor2204 Fat Viper outrunner
- Voltage7.4 V
- Notenot compatible with the stock 2-in-1 receiver/ESC
Why it stands out
- Smooth low-speed control, quiet
- Adjustable BEC for a bigger servo
Think twice if
- You don't want to buy and bind a new receiver
- You're happy with stock speed
Side-by-side
| Upgrade | Fit | Main effect | Install |
|---|---|---|---|
| 13 g wheel weights | Listed bodies | Low weight, wider stance | Easy |
| Brass skid | Listed bodies | Low weight, protection | Easy |
| Brass beadlocks + S5 tires | SCX24, TRX-4M | Grip, weight, stance | Easy |
| Steel driveshaft | 132 mm trucks | Metal center shaft | Easy |
| 40 mm oil shocks | SCX24 | Tunable suspension | Medium |
| 050 motor + transmission | SCX24 | More speed | Medium |
| MBL32 brushless kit | SCX24 + new receiver | Brushless control | Hard |
Fitment as stated on each Amazon listing. Wheelbases and stock parts from Axial's product pages and manuals.
What about the servo?
Axial doesn't publish torque for the stock AS-1 micro servo, so there's no honest way to say how much better a replacement is. It becomes worth it after weight and tires, because both make the steering work harder. If you go brushless with the kit above, its adjustable BEC can feed a stronger servo. Make sure any replacement fits the micro servo mount, or pair it with Axial's brass servo mount (AXI302005).
Upgrades and water
Most SCX24 manuals carry a section titled "Water-resistant vehicle with waterproof electronics". It says the electronics (ESC, servo, receiver) are waterproof, but "most of the mechanical components are water-resistant and should not be submerged", and the truck "should NOT be treated like a submarine". The Power Wagon and newest C10 manuals have no water section at all. After a wet run, Axial says to spin the water out of the tires, dry the battery contacts, rinse gently with no pressure washer, and oil the bearings and metal parts (not the motor). Aftermarket electronics only carry their own maker's rating. Our waterproof guide compares the brands.
If you only buy one thing
After the free jumper change and a spare battery, buy the INJORA brass beadlock wheels with S5 tires. Grip and low weight, plus a wider stance, in one box is the biggest change per dollar on an SCX24. If your truck is a 132 mm model, add the steel center driveshaft next. For the bigger picture on general upgrades, see the first five upgrades for any RC, and compare with the TRX-4M upgrade order. Choosing a crawler in the first place? Start with SCX24 vs TRX-4M vs Ascent-18.
Stock parts and Axial part numbers from Axial manuals and product pages; product details from Amazon listings, checked October 3, 2026. How we research · Affiliate disclosure