BashBench
A boy and his mother leaning on a log in the backyard, smiling at a small crawler truck on a flat stone in their homemade course

RC crawler course ideas: build a backyard course that's actually hard

A good course isn't a pile of rocks. It's a route that starts easy, gets harder gate by gate, and is sized for the truck you drive. Here's how to plan one in a weekend.

How we pick · Updated · We earn a commission when you buy through our Amazon links.

Build a crawler course as a route, not a pile: a clear start, 6 to 12 gates that get harder one at a time, and obstacles sized to your truck's tires. Use what's free (rocks from the yard, firewood, pavers, old planks), mark out-of-bounds lines so there's only one way through, and drive it before you call it done. For a small yard, build for a 1/18 or 1/24 truck; you'll get a longer, harder course in the same space.

How we put this together

We read the course-design guidance that ranks for this topic, including RC Car Action's advice on laying out comp courses, an FMS guide to backyard courses from household items, and RCTalk threads on building and scoring courses, and we sized obstacles from Traxxas, Redcat and Axial's published tire and clearance specs. The sizing rule is our own starting point, not a maker's figure. How we research.

Size obstacles to your truck

The single most useful number is your tire's outside diameter. A truck can usually walk up a step about half its tire height without drama. A step close to the full tire height takes line choice and throttle control. Taller than that, and you're into comp territory. Gaps between rocks should be just wide enough to drop a tire into. Logs lying across the path should start below your ground clearance and get bigger.

Truck (maker specs)Tire diameterGround clearanceEasy step (about half a tire)Hard step (about a full tire)
Traxxas TRX-4 (1.9 in wheels)4.64 in (118 mm)3.1 in (80 mm)about 2.3 inabout 4.5 in
Traxxas TRX-4 High Trail (2.2 in wheels)5.3 in4 in (99 mm)about 2.6 inabout 5.3 in
Redcat Ascent-1860 mm (2.4 in)38-42 mmabout 30 mmabout 60 mm
Traxxas TRX-4M2.2 in (56 mm)1.12 in (29 mm)about 28 mmabout 56 mm
Axial SCX24 Power WagonNot published1.45 in (37 mm)Measure your tire and halve it

Tire and clearance figures from Traxxas's TRX-4 chart and TRX-4M listing, Redcat's Ascent-18 pages and Axial's Power Wagon page. If you're not sure what scale to build for, our RC scale sizes guide shows how big each one really is.

Plan the layout

RC Car Action's course-design rules, which hold for a backyard as well as a competition: make the route obvious ("if your course layout needs a map and a navigator, you blew it"), make the first gate achievable and each one harder, mix climbs with side hills, downhills and tight turns, and never place a gate where the driver can't safely stand. Walk the layout before you mark it.

Here's a plan for a roughly 10 x 15 ft patch of yard that uses those rules:

Example 10-gate backyard crawler course A top-down plan. The start is bottom left. Gates 1 and 2 cross flat stones, gate 3 climbs a low log step, gate 4 is a side hill on a berm, gate 5 crosses a plank bridge, gates 6 and 7 wind through a rock garden, gate 8 is a tight turn between two boulders, gate 9 climbs a steep rock face and gate 10 descends to the finish at top right. A dashed out-of-bounds line surrounds the route. STARTFINISH 123 log4 side hill 5 bridge67 8 tight turn9 climb10 Dashed line = out of bounds

Mark gates with anything visible that won't hurt a truck: golf tees with flagging tape, cut tennis balls (one RCTalk poster saw them used at a competition), or chalk on rock. Use a string or rope for out-of-bounds lines so drivers can't shortcut.

Obstacle ideas that work

ObstacleWhat it testsMaterialsBuild tip
Log stepsClimbing, approach angleFirewood, branchesStagger heights; a slight incline makes it harder (FMS's starter build)
Rock gardenLine choice, articulationField stone, broken concreteLeave tire-width gaps so wheels drop in
Side hillRollover controlSoil berm, a tilted boardStart gentle; steepen once trucks clear it
BridgeSteering precisionPlank, ladder, rope bridgeBarely wider than the truck; a teeter adds a surprise
Tight turnSteering angle, reversingTwo boulders, blocksPut it after a climb, so momentum can't help
Steep faceWeight balance, tractionPaver stack, slabLean a slab against blocks and adjust the angle
Off-camber descentBrake and throttle controlRock slopePut it last so it decides the run
Water or mud crossingFun, and the truck's waterproofingShallow tray, low spotCheck your truck's manual first

RC Car Action also suggests the odd non-natural obstacle, like a wire bridge or a full-size tire, as long as it doesn't become a distraction. Before any water section, read is my RC car waterproof?

Two friends laughing with their hands in their pockets in a backyard, a line of rocks and short logs on the grass behind them
A course with a clear finish turns a quiet afternoon into a contest.

Simple scoring for a backyard comp

Crawling comps are scored like golf: lowest score wins. An RCTalk member's summary of common comp scoring is a good backyard starting point. It isn't an official rulebook, and clubs vary.

EventPoints
Each gate cleared (not counting start and finish)−1
Reverse+1
Rollover (rolled back by hand only, onto its wheels)+5
Touching the truck+10, restart at the last gate cleared
Hitting a gate marker+10
Out of bounds+10
Over the time limitDid not finish

For a family course, a simpler method from the same thread works: count climbs completed out of the total, add fouls, and break ties by time.

Indoor and tabletop courses

Small trucks change everything. One RCTalk builder put it plainly: it's significantly easier to build a great 1/24 course than an OK 1/10 one, and a 1/10 truck may clear a log pile in 30 seconds that keeps a 1/24 busy for two minutes. Indoors, stack books under a towel for hills, use wood offcuts for ledges, and build rocks from carved foam. Builders who want permanent terrain coat foam with plaster cloth and tile grout or exterior foam coating. Our SCX24 upgrades guide covers the small trucks most people use indoors.

Which truck for which course

Match the truck to the space you have. In a small yard or a living room, an Axial SCX24 Toyota 4Runner (battery and charger included) or a Traxxas TRX-4M Bronco (155 mm wheelbase, 1.12 in clearance) turns a few square feet into a real challenge. The Redcat Ascent-18 Apex is the stronger 1/18 climber. With a big yard and real rocks, a 1/10 like the TRX-4 F-150 High Trail needs bigger obstacles but rewards them. Our TRX-4 review, Axial lineup comparison and best crawlers for beginners go deeper. Driving a basher or buggy instead? Our guide to building an RC car track sizes the lanes to your car.

Two add-ons make a course more fun. Better tires change what a truck can climb, so our crawler tire guide is worth a look before you make the hardest gate. And a scale winch, like INJORA's wireless 1/10 winch (912 ratings), lets you add a recovery section where a truck has to pull itself up.

Keep it yard-friendly

Keep obstacles removable where you can: logs and pavers that lift out let you mow and let you rebuild the course when it gets easy. Build on a spot that drains, or the rock garden becomes a mud pit after rain. Skip sharp metal, glass and anything that can cut a tire or a hand. If you share the yard (or have an HOA), a neat border of stone or edging makes the course look like landscaping. And remember the advice from RC Car Action: drivers walk the course with transmitters in hand, so leave a safe path beside every gate.

Sources: RC Car Action course-design article; FMS backyard course guide; RCTalk threads on course building and scoring; Traxxas TRX-4 chart and TRX-4M listing, Redcat Ascent-18 pages and Axial SCX24 Power Wagon page for tire and clearance figures; checked October 13, 2026. How we research · Affiliate disclosure

Questions people ask

How do I build an RC crawler course?
Walk the space, pick a start and finish, and place 6 to 12 gates that get harder as you go. Fill the route with rocks, logs and slopes sized to your truck's tires, mark out-of-bounds lines, then drive it and adjust. RC Car Action's course-design advice: keep the route obvious and make the first gate easy.
What can I use for RC crawler obstacles?
Field stones, broken concrete, landscape pavers, firewood and short logs, cinder blocks, PVC pipe, old tires and planks for bridges. For indoor or tabletop courses, builders use carved foam coated with grout or plaster. Keep sharp edges and loose sheet metal out; they cut tires and fingers.
How big should obstacles be for a 1/10 crawler?
Size them to the tires. A Traxxas TRX-4 runs 4.64 in tall tires with 3.1 in of ground clearance, so steps of about 2 in are easy and steps near 4-5 in are hard. Scale everything down for a 1/18 or 1/24 truck.
How are crawler competitions scored?
Usually like golf: lowest score wins. One common summary gives a point back for each gate cleared and adds penalties for reversing, rollovers, touching the truck, hitting a gate marker and going out of bounds. Clubs set their own rules, so treat any sheet as a starting point.
Can I build a crawler course indoors?
Yes, and 1/24 or 1/18 trucks make it easy. Builders use books, wood offcuts and carved foam on a table or the floor. A forum builder on RCTalk notes that a great 1/24 course is much easier to build than an OK 1/10 course.
What's the best RC crawler for a backyard course?
For a small yard, a 1/18 or 1/24 crawler like the Redcat Ascent-18 Apex, Traxxas TRX-4M or Axial SCX24, because a small course takes them minutes to clear. For a big yard with real rocks, a 1/10 like the Traxxas TRX-4.