For most owners the best RC car tool kit is a set of hex drivers in 1.5, 2.0, 2.5 and 3.0 mm plus nut drivers in 5.5, 7 and 8 mm, and the cheapest way to get all of it with a 17 mm wheel wrench is the Hobbypark hex and nut driver set. If you only own Traxxas, the Traxxas TRX3415 tool set is made around the sizes in its trucks and has 3,142 Amazon ratings. Micro crawler owners need a different set entirely, with smaller tips and 4 to 5.5 mm box spanners. The sizes below come from the manuals, not from guesswork.
Quick picks
| Best kit for most owners | Hobbypark Hex and Nut Driver Set with 17 mm Wrench | Amazon |
|---|---|---|
| Best for Traxxas owners | Traxxas TRX3415 Tool Set with Pouch | Amazon |
| Best hex drivers on their own | INJORA 7-Piece HSS Hex Driver Set | Amazon |
| Best for micro crawlers | Multi-Size RC Screwdriver Set for SCX24 and TRX-4M | Amazon |
| One set for micro and 1/8 | HobbyPark Titanium Hex Driver Set with 17 mm Wrench | Amazon |
| The gift-grade set | MIP Metric Tool Set 5230 with Pouch | Amazon |
| Best simple stand | Traxxas 8796 Aluminum RC Stand | Amazon |
| Best starter workbench | RC Work Stand with 523-Piece Screw Kit | Amazon |
How we picked
This is a spec review; we haven't run a torture test on these drivers. Tom Bennett started with the "tools" pages of the owner's manuals: Traxxas Maxx 89086-4, Slash 4x4 68154-4, Mini Maxx 107154-1 and TRX-4M 97054-1, Arrma's Kraton 6S V6 manual, and Axial's SCX24 JLU manual and parts list. Then he matched every kit's listed tip sizes against those numbers and checked Amazon sales and ratings on October 15, 2026. A kit that's missing a size your manual asks for doesn't make the list for that truck. How we research.
What your truck already came with
Start here, because the tools in the box tell you which sizes matter and which ones you'll strip first.
| Truck (manual) | Supplied in the box | The maker also recommends |
|---|---|---|
| Traxxas Slash 4x4, Mini Maxx | 1.5, 2.0 and 2.5 mm L wrenches, 4-way wrench | Tire glue, hobby knife, side cutters or needle-nose pliers, soldering iron (Maxx) |
| Traxxas Maxx 89086-4 | 2.0 and 2.5 mm L wrenches, universal wrench | Same list; the manual uses a 1.5 mm wrench for set screws |
| Traxxas TRX-4M | 1.5 and 2.0 mm L wrenches, wheel wrench | Needle-nose pliers or side cutters |
| Arrma Kraton 6S V6 | 1.5, 2.0 and 2.5 mm hex keys; 7, 8, 10 and 17 mm wrench; 4, 5, 5.5 and 7 mm wrench | Hex drivers 1.5 to 3.0 mm, nut drivers, turnbuckle wrench, long-nose pliers, threadlock, tire glue, grease, oil spray, cleaner |
| Axial SCX24 JLU | Not listed in the manual | Parts list shows M2 nylon locknuts and 7 mm wheel hexes; Dynamite sells a startup tool set for Axial 1/24 |
Traxxas's manuals all say each model comes with "a set of specialty metric tools". They're L-shaped keys, fine for one job and miserable for a rebuild. A handled driver with a hardened tip is the first upgrade, because a stripped screw head turns a 10-minute arm swap into an afternoon.
Which kit covers which sizes
Every size here comes from the kit's Amazon listing. A check means the tip or wrench is in the box.
| Kit | Hex 0.9 to 1.3 mm | Hex 1.5 / 2.0 / 2.5 | Hex 3.0 | Nut 4 to 5.5 | Nut 7 / 8 | 17 mm wheel | Phillips |
|---|---|---|---|---|---|---|---|
| Hobbypark hex + nut set | ✓ | ✓ | ✓ (4.0, 5.5) | ✓ | ✓ | ||
| Traxxas TRX3415 | ✓ | ✓ (plus 3.5, 4.0) | ✓ (4, 5, 5.5) | ✓ | ✓ (#00, #0, #1) | ||
| INJORA 7-piece HSS | ✓ (0.9, 1.27, 1.3) | ✓ | ✓ | ||||
| HobbyPark titanium 7 + wrenches | ✓ | ✓ | ✓ | ✓ (4-way: 4, 5, 5.5) | 7 only | ✓ | |
| Micro set for SCX24 / TRX-4M | 0.05 in | 1.5, 2.0 | ✓ (4.0, 5.0, 5.5) | ✓ (2.0) | |||
| MIP metric set 5230 | 1.3 | ✓ | 5.5 | ✓ | |||
| Work stand + screw kit | ✓ | ✓ | 5.5 | 7 only | ✓ (3.0) |
Two gaps stand out. The MIP set stops at 2.5 mm, and Arrma's Kraton manual recommends 3.0 mm drivers. And only the two Hobbypark kits include a 17 mm wheel wrench, the size of the wrench Arrma puts in the Kraton box for its 17 mm-hex wheels.
The kits
Hobbypark Hex and Nut Driver Set with 17 mm Wrench
This is the set that lines up with Arrma's recommended-tools list almost item for item: hex drivers from 1.5 to 3.0 mm, nut drivers, a 17 mm wheel wrench and a turnbuckle wrench. It also covers the Traxxas sizes that matter. The magnetic tray is a small thing that saves a lot of crawling under the bench for dropped screws. The listing says the tips are heavy-duty steel; it doesn't name the grade, so treat it as a solid starter rather than a lifetime set.
- Hex1.5, 2.0, 2.5, 3.0 mm
- Nut drivers4.0, 5.5, 7.0, 8.0 mm
- Also4-way cross wrench, 17 mm wheel wrench, 6-in-1 turnbuckle wrench, magnetic screw tray
- Lengthabout 170 mm
Why it stands out
- Covers both Traxxas and Arrma 1/10 and 1/8 sizes
- 17 mm wheel wrench and turnbuckle wrench included
- Magnetic screw tray
Think twice if
- You own only micro crawlers
- You want a named tip steel or a lifetime warranty
Traxxas TRX3415 Tool Set with Pouch
Traxxas's own kit, and the most-reviewed tool set we found: 3,142 Amazon ratings and 300+ bought last month. It's built around one handle and interchangeable tips in a pouch, with every hex size the Slash, Mini Maxx and Maxx manuals supply and Phillips tips for body and electronics screws. The one-handle design is slower than separate drivers when you're swapping sizes, and there's no 17 mm wrench for big-truck wheel nuts.
- Hex1.5, 2.0, 2.5, 3.0, 3.5, 4.0 mm
- Nut drivers4, 5, 5.5, 7, 8 mm
- Phillips#00, #0, #1
- Slotted2, 4, 5 mm
- Wrench5 and 8 mm
- Handleone, interchangeable
Why it stands out
- Widest hex range here, up to 4.0 mm
- Phillips and slotted tips included
- Compact pouch for a field bag
Think twice if
- You'd rather grab separate drivers than swap tips
- You run a 1/8 truck with 17 mm wheel nuts
INJORA 7-Piece HSS Hex Driver Set
If you already have nut drivers and wrenches, this is the upgrade for the job you do most. HSS tips, knurled handles with the size etched on them, and a spinning end cap so you can drive a long screw with one hand. The three tiny sizes (0.9, 1.27 and 1.3 mm) cover set screws and micro trucks (1.27 mm is the 0.050 in size). 550 Amazon ratings at 4.7 stars.
- Hex0.9, 1.27, 1.3, 1.5, 2.0, 2.5, 3.0 mm
- TipsHSS steel
- Length173 mm, 90 mm handle
Why it stands out
- HSS tips on every driver
- Covers micro sizes and 3.0 mm
Think twice if
- You need nut drivers or a wheel wrench too
Multi-Size RC Screwdriver Set for SCX24 and TRX-4M
Micro crawlers use tiny hardware. Axial's SCX24 parts list shows M2 nylon locknuts, and the box spanners here (4.0, 5.0 and 5.5 mm) are the small nut sizes, with 1.5 and 2.0 mm hex tips for the screws. The listing names the TRX-4M, SCX24, FCX24 and Losi Mini-T 2.0 among the trucks it fits. Seven separate drivers means no tip swapping on a 1/24 chassis.
- Box spanners4.0, 5.0, 5.5 mm
- Hex0.05 in, 1.5, 2.0 mm
- Phillips2.0 mm
- Drivers7 separate
- Handlesaluminum
Why it stands out
- Small box spanners that big-truck kits skip
- Separate drivers, no swapping
Think twice if
- You also own a 1/10 truck; you'll still need 2.5 and 3.0 mm
HobbyPark Titanium Hex Driver Set with 17 mm Wrench
For the household with an SCX24 on the shelf and a Kraton in the garage. Seven hex sizes from 0.9 to 3.0 mm, a 4-way cross wrench and an extended 17 mm wheel wrench. Cross wrenches are clumsy for anything except wheel nuts and quick checks, so pair it with a nut driver if you rebuild a lot.
- Hex0.9, 1.27, 1.3, 1.5, 2.0, 2.5, 3.0 mm
- 4-way cross wrench4, 5, 5.5, 7 mm
- Length182 mm
Why it stands out
- Hex range covers micro and full-size trucks
- 17 mm wheel wrench included
Think twice if
- No proper nut drivers, only a cross wrench
MIP Metric Tool Set 5230 with Pouch
MIP is the name serious racers know, and this set is made in the USA with handled drivers and matching 1/4 in bits for a power driver, all in a 40-pocket bag. It's a gift for someone who wrenches every week. Two cautions: it costs several times more than the others here, and it stops at 2.5 mm, so a big Arrma owner still needs a 3.0 mm driver. Only 16 Amazon ratings so far.
- Hex1.3, 1.5, 2.0, 2.5 mm (handled and 1/4 in bits)
- Nut drivers5.5, 7.0, 8.0 mm (handled and bits)
- Bag15 in, 40 pockets
Why it stands out
- Handled drivers plus power-driver bits
- Made in USA
Think twice if
- Your truck uses 3.0 mm hardware
- You're buying a first set on a budget

Stands and work stations
"RC car stand" gets as many searches as "tool kit", and for good reason. Getting the wheels off the bench lets you spin the drivetrain, check for binding and work at eye level.
Traxxas 8796 Aluminum RC Stand
An aluminum stand sized for the full range of Traxxas 1/10 to 1/8 trucks, with foam inserts sold separately for the TRX-4M and 1/16 models, per the listing. It won't rotate, but it's solid and small enough to leave on the bench.
- FitsTraxxas 1/10 to 1/8 vehicles
- 1/18 and 1/16with foam inserts 9794 or 8794
- Materialanodized aluminum
- Size7.7 × 6.6 × 5.7 in
Why it stands out
- Fits Traxxas 1/10 to 1/8
- Inserts available for small trucks
Think twice if
- You want a rotating stand with storage
RC Work Stand with 523-Piece Screw Kit
A rotating stand with holes for holding shocks during a rebuild and adjustable height, bundled with a sorted screw assortment and a basic driver set. The screws are generic sizes, so they're for emergencies more than exact replacements, and the drivers are entry level. As a first bench setup or a gift, it's a lot in one box: 424 ratings and 200+ bought last month.
- Stand360° rotation, adjustable height, magnetic strips, shock rebuild holes
- Screws520+ pieces sorted
- Drivershex 1.5, 2.0, 2.5, 3.0 mm; Phillips 3.0; slotted 3.0; sleeves 5.5, 7.0 mm
- Alsocross wrench, tweezers
Why it stands out
- Rotating stand with shock rebuild holes
- Spare screw assortment
Think twice if
- You need exact OEM screws; buy those by part number
Supplies the manuals ask for
Arrma's Kraton 6S V6 manual lists more than drivers in its recommended tools: threadlock, tire glue, grease and oil spray, plus a brush and a cleaner spray. Two of these matter right away. The manual calls for threadlock on the screws that thread into the aluminum motor mount, and on the motor screws and pinion set screw when you reassemble. Tire glue is how you fix a tire that has come loose from its wheel; our guide to gluing RC tires covers which CA to use. Traxxas's manuals add a hobby knife and side cutters, which you'll need when it's time to trim and paint a new body (see how to paint an RC body).
Losi owner? Dynamite's metric startup tool set DYN2834 lists fit for Losi 1/8 and 1/10 vehicles, except the LST platform, which uses mixed US and metric hardware.
If it's a gift
For someone with one Traxxas truck, the TRX3415 is the safe choice. For mixed brands or a 1/8 truck, the Hobbypark set with the 17 mm wrench. For a micro crawler, the SCX24 and TRX-4M set. The MIP set is the "they already have everything" gift. More ideas are in our gifts for RC car lovers and the Christmas gift guide.
What to do with the new drivers
The first jobs most owners tackle are the ones in our first five upgrades for any basher, and a pinion swap is the classic first wrench job; pinion and spur gears explained walks through mesh. Building from a kit instead? The best RC car kits lists what each one needs. And if you're digging into electronics, read RC ESCs explained before you unplug anything.
Tool lists from Traxxas owner's manuals (89086-4, 68154-4, 107154-1, 97054-1), the Arrma Kraton 6S V6 manual (ARA8608V6) and the Axial SCX24 JLU manual (AXI00002V3); kit contents and sales figures from Amazon listings; all checked October 15, 2026. How we research · Affiliate disclosure