BashBench
A hard-case LiPo battery being strapped into the battery tray of a short course RC truck

Traxxas Slash battery guide: what fits, what plugs in, what to buy

Every current Slash takes a different mix of NiMH, 2S and 3S. Here's the tray size Traxxas publishes for each version, the plug question answered, and the packs whose listed dimensions actually fit.

How we pick · Updated · We earn a commission when you buy through our Amazon links.

For most Slashes the answer is a 2S LiPo around 5000 to 6200 mAh, no taller than 25 mm, with a Traxxas plug. The 4X4 VXL and Ultimate can also take 3S, as can both VX3 Brushless versions, which is where the speed is, but 3S packs are often taller and need Traxxas's battery standoffs. Before buying anything, check two things: which version you have, and the height of the pack.

How we picked these packs

We started with the battery compartment dimensions Traxxas publishes on each Slash product page and in the owner's manuals, then checked them against the dimensions each battery maker lists on Amazon. A pack only made the list if its listed size fits a current Slash, with any extra part (standoffs, adapter) named. Sales and ratings come from Amazon on October 3, 2026: the HOOVO 2S pair has more than 1,300 ratings, and the Traxxas 2923X NiMH more than 2,200. We didn't run these packs in a Slash; fit is from published dimensions, not a test fitting. How we research.

Which Slash do I have?

Your model number is on the box and the manual cover. Without either, read the speed control's label:

  • XL-5, brushed Titan 12T motor: Slash 2WD XL-5 (58234-8). NiMH or 2S LiPo.
  • BL-2s: Slash 4X4 BL-2s (68154-4). 6 to 7 cell NiMH or 2S LiPo.
  • VXL-3s, Velineon 3500 motor: Slash 4X4 VXL (68386-4) or Ultimate (68277-4). NiMH or 2S/3S LiPo.
  • VX3, V3200 motor with a fan on the ESC: Slash 4X4 Brushless (68454-4) or Slash 2WD Brushless (58434-4). 2S or 3S LiPo only.

Older models aren't covered by traxxas.com today, so if your manual differs from this page, the manual wins.

Slash battery fit table

VersionCompartment (Traxxas)Batteries it acceptsBattery in the box
2WD XL-5 (58234-8)165 × 50 × 23 mm, 25 mm6 and 7-cell NiMH flat packs, 7-cell hump; "many 2S LiPo"3000 mAh 7-cell NiMH iD + 4 A USB-C charger
2WD Brushless VX3 (58434-4)166 × 49 × 28 mm2S or 3S LiPo; NiMH not supportedNone
4X4 BL-2s (68154-4)165 × 50 × 23 mm; 5827X tall hold-down for oversized packs6–7 cell NiMH or 2S LiPoNone
4X4 VXL (68386-4)166 × 49.5 mm; 23 or 25 mm tall on the stock strap, up to 44 mm with 5827X standoffs6–7 cell NiMH, 2S or 3S LiPoNone
4X4 Ultimate (68277-4)Same as VXL; standoffs listed as 7426X6–7 cell NiMH, 2S or 3S LiPoNone
4X4 Brushless VX3 (68454-4)165 × 50 × 23 mm / 25 mm2S or 3S LiPo; NiMH not supportedNone

Height is where most packs fail to fit. A 2S hard case is usually about 25 mm tall; plenty of 3S packs are 28 to 30 mm. The VXL manual adds that "there is some flex with the battery strap", which helps with a millimeter, not five.

Measuring the height of an RC battery pack with a caliper
Compare the pack's listed height with the 23 or 25 mm Traxxas gives for the stock strap before you order.

Packs that fit a Slash

Best 2S for most Slashes

HOOVO 2S 6200 mAh 70C, Traxxas-style plug (2-pack)

At 139 × 47 × 25 mm it slides into the 165 × 50 mm tray of every current Slash with room to spare lengthwise, and it plugs straight in without an adapter. Two packs in the box means one in the truck and one charging. The 25 mm height suits the 25 mm strap setting on the XL-5 and VXL, and the 4X4 Brushless; on the BL-2s, where Traxxas lists 23 mm, plan on the tall hold-down.

Read the listing's notice before you buy: HOOVO says the plug "is an older version and may not be compatible with the Tracxas Charger". These are not iD packs, so a Traxxas iD charger won't recognize them automatically.

  • Cells2S, 7.4 V
  • Capacity6200 mAh
  • Discharge70C
  • Size139 × 47 × 25 mm
  • PlugTraxxas-style
  • Pack count2

Why it stands out

  • Fits the tray of every current Slash by listed size
  • No adapter needed for the truck
  • 1,350+ Amazon ratings

Think twice if

  • You charge on a Traxxas iD charger and want it to set itself up
  • You own a BL-2s and don't want to buy the tall hold-down
Check price on Amazon
Most 2S runtime

OVONIC 2S 7200 mAh 130C, XT60 with Traxxas adapter (2-pack)

The biggest capacity we found in a Slash-sized hard case. OVONIC lists it at 26 mm tall, a millimeter over the VXL's 25 mm strap height, so expect a snug strap or the standoffs. It ships with an XT60 plug and an XT60-to-Traxxas adapter, which is handy if you also run trucks with XT60 but adds a junction to the power path.

  • Cells2S, 7.4 V
  • Capacity7200 mAh
  • Discharge130C
  • Size139.5 × 47.5 × 26 mm
  • PlugXT60, plus XT60-to-TR adapter

Why it stands out

  • 7200 mAh, the most runtime of these picks
  • Works with XT60 chargers and other XT60 trucks

Think twice if

  • Your Slash is a BL-2s or XL-5 with a 23 mm setting
  • You'd rather not run an adapter in the truck
Check price on Amazon
Best 3S fit

OVONIC 3S 5000 mAh 120C, XT60 and TRA plug (2-pack)

Most 3S packs are too tall for the Slash's stock strap. This one isn't, quite: OVONIC lists 25.2 mm, a hair over the 25 mm setting, and 155 mm long against the 166 mm tray. For a VXL, Ultimate or VX3 Brushless Slash that's the closest thing to a drop-in 3S pack we found, and Traxxas's own 3S speed claims call for 5000 mAh or more.

  • Cells3S, 11.1 V
  • Capacity5000 mAh
  • Discharge120C
  • Size155.09 × 43 × 25.2 mm
  • PlugTRA (per listing)

Why it stands out

  • Low enough for the stock strap, give or take the 0.2 mm
  • 5000 mAh, the minimum Traxxas lists for its 3S speed figures
  • Two packs per box

Think twice if

  • You have an XL-5 or BL-2s, which are 2S only
  • You want more than 5000 mAh on 3S
Check price on Amazon
3S with standoffs

HOOVO 3S 5200 mAh 60C, Traxxas-style plug (2-pack)

A shorter, taller 3S brick. At 29 mm it's over the VXL's 25 mm strap height, so it needs the 5827X standoffs (up to 44 mm) on a VXL or the 7426X on an Ultimate. The 2WD Brushless lists a 28 mm compartment, so it's a millimeter tall there too. Same charger caveat as the HOOVO 2S: the listing says the plug may not fit a Traxxas charger.

  • Cells3S, 11.1 V
  • Capacity5200 mAh
  • Discharge60C
  • Size137.5 × 44.5 × 29 mm
  • PlugTraxxas-style

Why it stands out

  • Traxxas-style plug, no adapter in the truck
  • 720+ Amazon ratings

Think twice if

  • You don't want to fit standoffs
Check price on Amazon
NiMH spare for XL-5 and BL-2s

Traxxas 2923X 3000 mAh 7-cell NiMH iD

The same pack the Slash 2WD XL-5 ships with. If you're keeping the XL-5 on NiMH, or running a BL-2s or VXL on NiMH while you learn, a second one doubles your driving with no charger change: Traxxas iD chargers read it automatically. Traxxas notes its capacity ratings "reflect the minimum capacity for the pack, not the maximum".

  • ChemistryNiMH
  • Cells7, 8.4 V
  • Capacity3000 mAh
  • PlugTraxxas High-Current with iD

Why it stands out

  • Plugs and charges exactly like the stock XL-5 pack
  • No low-voltage detection worries (NiMH)

Think twice if

  • You have a VX3 Brushless Slash, which doesn't support NiMH
  • You want speed; a 2S LiPo has more punch
Check price on Amazon
A NiMH pack, a 2S LiPo and a taller 3S LiPo side by side
Length rarely decides fit in a Slash. Height does: compare a 25 mm 2S case with a typical 29 mm 3S brick.

Side-by-side

PackCellsmAhHeightFits stock strap?Plug
HOOVO 2S 62002S620025 mmYes on 25 mm settingTraxxas-style
OVONIC 2S 72002S720026 mmSnugXT60 + adapter
OVONIC 3S 50003S500025.2 mmSnugTRA
HOOVO 3S 52003S520029 mmNo, needs standoffsTraxxas-style
Traxxas 2923X7-cell NiMH3000Check listingStock XL-5 packTraxxas iD

The plug: Traxxas High-Current and iD

Every current Slash uses the Traxxas High-Current Connector, and the BL-2s and VX3 manuals call it the "Traxxas iD High-Current Connector". iD adds battery identification: Traxxas says an iD charger identifies the pack by itself (type, voltage and capacity, per Traxxas), and that older non-iD packs "can be charged in manual mode by setting the battery type and charge rate" (Traxxas Battery Basics).

That's the catch with aftermarket packs. A Traxxas-style plug fits the truck, but without iD the charger can't read it, and two of the listings above warn their plug may not fit a Traxxas charger at all. For packs with other plugs, a short Traxxas-to-XT60 adapter set works, but Traxxas's VX3 manuals are blunt about charging iD packs: "ONLY use a Traxxas iD charger to charge Traxxas iD batteries ... DO NOT use an adapter of any kind." Our printable RC battery connector chart covers every plug and its rating.

Which charger

If you'll run Traxxas iD packs, buy a Traxxas iD charger. The Traxxas 2970 EZ-Peak Plus charges 2S and 3S LiPo plus 5 to 8 cell NiMH, recognizes iD packs, has a one-button storage charge and balance ports for non-iD packs. The Traxxas 2985 USB-C iD charger covers 2 to 3 cell LiPo and 5 to 7 cell NiMH at up to 4 A, but you supply the USB-C cable and power supply. It's an iD-only charger: its instruction sheet says "non-Traxxas batteries, and non-Traxxas connectors are not compatible with this charger," and older non-iD Traxxas plugs won't work either. If you're buying the HOOVO or OVONIC packs above, skip the 2985 and get a universal balance charger instead; our beginner LiPo charger guide and Traxxas charger guide cover both kinds.

For aftermarket packs, any LiPo balance charger works. The SkyRC B6Neo charges 1S to 6S with an XT60 output and a storage mode, which is the setting you'll use most if you only run the truck on weekends. Our beginner LiPo charger guide compares more options.

A LiPo charging inside a fire-resistant bag on a concrete floor
Traxxas: charge LiPo in a fire-retardant container on a non-flammable surface such as concrete, and never leave it unattended.

LiPo rules that apply to every Slash

  • Turn low-voltage detection on. Traxxas speed controls alert below 3.2 V per cell, 9.6 V on a 3S pack (Battery Basics). The XL-5 ships with it off because the truck comes with NiMH; Traxxas says to activate it if you install LiPo. The BL-2s and VXL manuals contradict themselves on the factory default, so check the LED: solid green at power-on means it's on.
  • Charge at 1C or less unless the pack's label says otherwise, never inside the truck, never unattended or overnight (Horizon Lithium Battery Safety 54892).
  • Storage-charge packs you won't use for a week. Traxxas's iD chargers have a Storage mode for it.
  • Ages: Traxxas's manuals say no one under 18 should use or handle LiPo packs without a knowledgeable adult.
  • Water: the Slash's electronics are water-resistant, but Traxxas's manuals add that "not all batteries can be used in wet environments"; ask the pack maker.

Full and storage voltages for 2S and 3S, with cutoffs, are on our printable LiPo voltage chart. A Tenergy cell meter on the balance lead shows each cell, which your ESC can't.

What to buy

Running a 2S Slash (XL-5, BL-2s, or a VXL you're not ready to push)? Two HOOVO 2S 6200 packs and a balance charger cover it. Want the speed the VXL and VX3 trucks were built for? The OVONIC 3S 5000 is the 3S pack that fits the stock strap, and our Slash top speed page shows what 3S does to each version. Before adding power, check the upgrade order: 3S finds the weak driveline parts quickly. For packs for other trucks, see the best RC car batteries.

Compartment sizes and battery specs from Traxxas product pages and owner's manuals; pack sizes from each maker's Amazon listing, checked October 3, 2026. Prices change, so the buttons show the current price on Amazon. How we research · Affiliate disclosure

Questions people ask

What battery comes with a Traxxas Slash?
Only the Slash 2WD XL-5 (58234-8) includes one: a 3000 mAh 7-cell 8.4 V NiMH pack with iD, plus a 4-amp USB-C charger. Every other current Slash, including the 4X4 BL-2s, 4X4 VXL and the VX3 Brushless models, is sold without a battery or charger.
What size battery fits a Traxxas Slash 4x4?
Traxxas lists the Slash 4X4 VXL compartment as 166 mm long by 49.5 mm wide, 23 or 25 mm tall with the stock strap, and up to 44 mm with the optional 5827X battery standoffs. The BL-2s and 4X4 Brushless pages list 165 × 50 × 23 mm. Compare those with the pack's listed length, width and height.
Can a Traxxas Slash run on 3S?
The Slash 4X4 VXL, 4X4 Ultimate, 4X4 Brushless and 2WD Brushless accept 2S or 3S LiPo. The 2WD XL-5 and 4X4 BL-2s are limited to 2S LiPo or NiMH, and the VX3 models don't support NiMH at all.
What connector does a Traxxas Slash use?
The Traxxas High-Current Connector, which the BL-2s and VX3 manuals call the Traxxas iD High-Current Connector. Packs with other plugs need an adapter or a plug swap, and Traxxas's VX3 manuals say not to use any adapter when charging Traxxas iD batteries.
Do I need a Traxxas charger for a Traxxas battery?
For Traxxas iD packs, Traxxas's VX3 manuals say to charge them only on a Traxxas iD charger. Other packs can go on any LiPo balance charger set to the right chemistry and cell count. Traxxas iD chargers also charge non-iD packs, in manual mode.
How do I turn on low-voltage detection on a Slash?
Hold the EZ-Set button for about 10 seconds to toggle it; a solid green LED means LiPo low-voltage detection is on, solid red means it's off. The XL-5 ships with it off because the truck comes with NiMH, and Traxxas says never to run LiPo with it disabled.