A current Slash runs anywhere from about 30 mph to 60+ mph, and the version decides which. Traxxas rates the brushed 2WD XL-5 at 30+ mph on its included NiMH pack, the VX3 Brushless models at 50+ mph on 3S, and the 4X4 VXL at 60+ mph, but only with a 3S LiPo and a 19-tooth pinion you buy separately. The speed gap people quote is brushed vs brushless, not 2WD vs 4X4; our Slash 2WD vs 4X4 breakdown shows why. Find your version below, then read across.
Where these numbers come from
Every claim and gearing figure on this page comes from Traxxas: the current product pages and the owner's manuals for each model number, checked October 3, 2026. The manuals print a gearing chart for each truck, with the stock pinion and spur marked and every alternative color-coded for how Traxxas wants it used.
The theoretical column is our math, from the formula in those same manuals: spur ÷ pinion × the internal ratio (2.85 for the Slash 4X4, 2.72 for the 2WD) gives the final drive ratio, and motor kV × battery voltage ÷ that ratio gives wheel rpm. Traxxas doesn't publish the Slash's tire diameter, so every theoretical figure here uses 110 mm as an example diameter. That number is our assumption, not a Traxxas spec. Measure your own tire and run it through the RC top speed calculator for your exact figure. We haven't GPS-tested these trucks, and Traxxas doesn't say how it measures its claims.
Which Slash do I have?
The model number is printed on the box and on the owner's manual cover ("MODEL 68386-4"). No box? The speed control's name tells you:
- XL-5, Titan 12T 550 brushed motor, 48-pitch gears: Slash 2WD XL-5 (58234-8). 2S LiPo or NiMH.
- BL-2s with a BL-2s 3300 Kv brushless motor: Slash 4X4 BL-2s (68154-4). 2S LiPo or 6 to 7 cell NiMH.
- VXL-3s with a Velineon 3500 motor: Slash 4X4 VXL (68386-4) or the 4X4 Ultimate (68277-4, which adds factory aluminum hub parts plus GTR shocks). 2S or 3S LiPo.
- VX3 with a V3200 motor (5 mm shaft) and an ESC fan: Slash 4X4 Brushless (68454-4) or Slash 2WD Brushless (58434-4). 2S or 3S LiPo, no NiMH.
Older Slashes (for example the earlier 2WD VXL) aren't on traxxas.com any more and their manuals aren't either, so these tables may not match them. Check your own manual's gearing chart.
Slash top speed by version
| Version | Traxxas claim and what it needs | Stock gearing (manual) | Theoretical at 110 mm* |
|---|---|---|---|
| Slash 2WD XL-5 (58234-8) | 30+ mph "with 7-cell battery" (included 3000 mAh NiMH) | See note below the table | Not calculated (brushed, no kV published) |
| Slash 2WD Brushless VX3 (58434-4) | 35+ mph on 2S, 50+ mph on 3S, "no gearing change required" | 18/54, final drive 8.18 | 37.4 mph (2S), 56.1 mph (3S) |
| Slash 4X4 BL-2s (68154-4) | No mph published; listed "Under 30 mph" | 13/54, final drive 11.84 | 26.6 mph (2S); 28.6 mph with the 14T |
| Slash 4X4 Brushless VX3 (68454-4) | 35+ mph on 2S, 50+ mph on 3S, no gearing change | 18/54 (steel spur), 8.54 | 35.7 mph (2S), 53.5 mph (3S) |
| Slash 4X4 VXL (68386-4) | 60+ mph with 3S LiPo and optional 19T pinion (sold separately) | 13/54, 11.82 | 42.3 mph stock on 3S; 61.8 mph with 19T |
| Slash 4X4 VXL Ultimate (68277-4) | 60+ mph with 3S and optional gearing | 13/54, 11.82 | Same as the VXL |
*Theoretical = no load, nominal voltage (3.7 V per LiPo cell), 110 mm example tire. Real speed lands below it; the calculator shows an estimate at an efficiency factor you choose. Final drive figures are the numbers printed in Traxxas's gearing charts.
The 2WD XL-5 is the one Slash we can't pin down. Its manual's gearing table doesn't mark a stock row. The parts list shows a 16T pinion and a 90T spur as standard parts, which works out to 15.30 with Traxxas's own formula, but the product page says "final drive: 9.05", which matches neither 16/90 nor the 23/86 high-speed set. Count the teeth on your truck before you plan a gearing change. The 2WD Brushless has a smaller version of the same problem: its product page also says 9.05, while the manual's chart marks 18/54 at 8.18 as the out-of-box setup. We go with the manual.

The VXL's 60+ mph, in detail
The Slash 4X4 VXL is the version people mean when they ask about Slash speed, and its manual has the clearest chart. Here's Traxxas's own speed table for it, with our theoretical number beside each row:
| Traxxas says | Pinion / spur | Battery | Theoretical at 110 mm |
|---|---|---|---|
| 35+ mph | 13/54 (stock) | 7-cell NiMH, 8.4 V | 32.0 mph |
| 40+ mph | 18/54 (included) | 7-cell NiMH, 8.4 V | 44.3 mph |
| 40+ mph | 19/54 (sold separately) | 2S LiPo, 7.4 V | 41.2 mph |
| 45+ mph | 13/54 (stock) | 3S LiPo, 11.1 V | 42.3 mph |
| 60+ mph | 19/54 (sold separately) | 3S LiPo, 11.1 V | 61.8 mph |
Traxxas also lists minimum pack sizes for those rows: 4000+ mAh for the NiMH and 2S rows and 5000+ mAh for 3S. Two of its claims (35+ and 45+ on stock gearing) sit above our theoretical numbers at 110 mm, and the rest sit just below. Traxxas doesn't say what diameter or charge level it assumed. A fully charged 3S pack (12.6 V) lifts the 19T figure to 70.1 mph theoretical, and every 5 mm of tire diameter moves it by about 2.8 mph, so the claims are plausible bests rather than numbers you'll see on every pass.
The color code on the chart matters as much as the numbers. The 18T in the box is marked "Included optional gearing, for high-speed NiMH running only". The 19T is "Optional gearing (not included, sold separately), for high-speed LiPo running only". Traxxas adds that this high-speed gearing "is not recommended for off-road or repetitive starting and stopping", and that you should keep to paved surfaces when you run it. Pinions below 13T on the 54T spur are on the chart, but they need the motor end cap or center shaft cover modified.
How to make a Slash faster, in order
- Battery first, if your ESC allows it. On the VXL and VX3 trucks, 3S instead of 2S is the biggest jump: about 50% more motor rpm on the same gearing. The XL-5 and BL-2s ESCs stop at 2S.
- Then one pinion step at a time, within the colors your manual's chart allows. Check motor temperature after two or three minutes.
- Brushless, for the brushed 2WD. Traxxas sells the BL-2s system on its own; our Slash upgrades guide covers when that's worth it.

A bigger pinion adds heat as well as speed. Traxxas doesn't publish a temperature limit in these manuals, so we won't invent one. Check after a short run with an infrared thermometer like the Etekcity 774 infrared thermometer, and if the motor is much hotter than it was on stock gearing, go back a tooth. The manuals also warn not to judge gearing by temperature in wet conditions, since water cools the motor can and hides the problem.
For a 3S VXL, a pack has to fit the tray. Traxxas gives the VXL compartment as 166 × 49.5 mm, 23 or 25 mm tall with the stock strap and up to 44 mm with the optional 5827X standoffs. The HOOVO 3S 5200 mAh pair with Traxxas-style plugs lists 137.5 × 44.5 × 29 mm, so it needs those standoffs, and its listing warns that the plug "may not fit the Traxxas Charger". The full fit table is on our Traxxas Slash battery page.
Run your own numbers
The calculator has Slash presets taken from these manuals. Load yours, enter your measured tire diameter, then try pinions:
- Slash 4X4 VXL preset
- Slash 4X4 BL-2s preset
- Slash 4X4 Brushless (VX3) preset
- Slash 2WD Brushless (VX3) preset
It warns when you step outside the pinion range on Traxxas's chart or above the ESC's cell limit. For how pitch and mesh work, see pinion and spur gears explained.

Which Slash for speed
If speed is the reason you're buying, get a 3S-capable truck. The Slash 4X4 Brushless VX3 is the simplest route, because Traxxas rates it 50+ mph on 3S with the gearing it ships with. The 4X4 VXL goes further but needs the separate 19T pinion and pavement to do it. The BL-2s and XL-5 trucks are 2S trucks, and their claims (none published for the BL-2s, 30+ for the XL-5) say so. Our Slash 4x4 review covers the rest of the buying decision, and the upgrades guide covers what to strengthen before you add speed.
Speed claims and gearing charts, plus compartment sizes, from Traxxas product pages and owner's manuals (68386-4, 68154-4, 68454-4, 58434-4, 58234-8), checked October 3, 2026. Theoretical figures are BashBench calculations at a 110 mm example tire. How we research · Affiliate disclosure