BashBench
Two matching hard-case LiPo battery packs beside a large RC monster truck chassis

X-Maxx batteries: tray size, 6S vs 8S, and which packs fit

The X-Maxx runs on two matched LiPo packs at once. Here's what Traxxas specifies, how big the tray really is, and how to buy and charge a pair without guessing.

How we pick · Updated · We earn a commission when you buy through our Amazon links.

An X-Maxx needs two identical LiPo packs with Traxxas High-Current Connectors. Two 4S packs give it 8S, which is what Traxxas recommends and what every speed claim assumes; two 3S packs (6S) is the minimum. The compartment on each side is 197 mm long, 51.5 mm wide and 45 mm tall with the stock strap. Buy the packs as a matched pair and charge them separately.

Which X-Maxx do you have?

Everything below applies to the current X-Maxx 8S Belted (77096-4) and the X-Maxx Ultimate (77097-4), which share the same speed control and battery compartment in Traxxas's manuals. The older 77086-4 X-Maxx has no manual on traxxas.com any more, so check its box or manual before relying on these dimensions. The Traxxas Maxx (89086-4) is a smaller truck that takes a single 4S pack in a 186 × 48 × 43 mm tray, and Traxxas Maxx battery fit is covered on a different page. The XRT also runs on two packs, with the same 2890X 4S as Traxxas's recommendation, and our XRT review covers its battery setup. Mini Maxx owners: that truck uses a single 2S iD pack in a 113 × 41 × 22 mm tray, covered in our Mini Maxx review.

How we picked

Battery setup and tray dimensions come from the X-Maxx 77096-4 owner's manual and product page, checked October 3, 2026. Aftermarket pack dimensions come from each Amazon listing; we only suggest packs whose listed size is inside Traxxas's tray numbers. Sales figures are Amazon's "bought in the past month" on the same date. We haven't fitted these packs to a truck ourselves, so measure before you strap anything down. How we research.

Why two packs, and what 8S means

LiPo cells are 3.7 V each, nominal. A 4S pack has four, so 14.8 V. The X-Maxx's VXL-8s speed control takes one pack on each side of the chassis and uses both together: two 4S packs give it eight cells' worth, 29.6 V nominal and 33.6 V fully charged, which is the controller's stated maximum. Two 3S packs give it 6S, 22.2 V nominal.

Traxxas's wording is "Two identical LiPo batteries" and "4S, 6S, or 8S LiPo battery power". It doesn't describe how the packs are wired together, and you don't need to know: you plug one into each lead. What you do need to respect is the matching rule, in Traxxas's words: "Do not mix battery types, capacities, or charge levels; use the same voltage, capacity, and charge level for both batteries." The UDR follows the same matched-pair rule with two 2S or two 3S packs; see our UDR battery notes.

SetupTraxxas statusNominal voltageStock gearing, theoretical
2 × 4S (8S)Recommended (two 6700 mAh 2890X)29.6 V42.1 mph (Traxxas: "40+ mph")
2 × 3S (6S)Minimum (two 5000 mAh 3S)22.2 V31.5 mph
NiMH"Do not use"n/an/a

The speed column comes from our top speed calculator with the X-Maxx preset. The X-Maxx gearing page has every pinion and spur on both voltages.

The tray: 197 × 51.5 mm, and the height is the catch

Traxxas's manual gives these "Battery Compartment Specs":

  • 197 mm (7.75") long × 51.5 mm (2.03") wide
  • Height with the stock strap: 45 mm (1.77")
  • Height with the included hold-down spacer: 28.5 mm (1.12")

The product page rounds the same box to 197 × 52 × 44 mm. Use the manual's numbers, and leave a millimeter or two of margin. The manual adds that the tray is built around Traxxas's 6700 mAh 4S pack and that "When using other LiPo batteries, additional foam blocks and battery pack spacers are required for proper fitment". Spacer kit 7717X has two spacers, four foam blocks and two foam pads.

A LiPo pack going into the side battery compartment of a large RC truck
Long and narrow packs fit; tall square ones don't. Height is the number most aftermarket listings hide in the small print.

Most 1/10-size 4S packs are too short to fill the length and are held by the foam blocks instead. That's fine as long as the pack can't slide. A pack that's wider than 51.5 mm won't go in at all.

Traxxas pack (from the manual's chart)Fits as is?
2890X 6700 mAh 4S 25C iDYes, the tray is built for it
2889X 5000 mAh 4S 25C iDWith extra spacers
2857X 6400 mAh 3S 25C iDWith extra spacers
2872X 5000 mAh 3S 25C iDWith extra spacers

The plug

The X-Maxx's speed control has Traxxas High-Current Connectors (the Ultimate's manual calls them "Traxxas iD High Current Connectors"). Traxxas's own Power Cell packs have the iD version, which lets an iD charger read the pack and set itself up. Aftermarket packs sold "with Traxxas plug" usually have the connector without the iD chip, so an iD charger needs to be set by hand. Traxxas's Battery Basics page says older, non-iD batteries "can be charged in manual mode by setting the battery type and charge rate."

Adapters work, but they're a compromise. Each one adds a junction on a truck pulling serious current, and Traxxas's VX3 manual warns that using an adapter to charge iD packs "defeats iD system safety protocols". The RC battery connector chart shows the plug families side by side if you're deciding whether to standardize on another connector.

Packs that fit

Traxxas's 2890X is the reference pack. These aftermarket 4S packs have the Traxxas connector already fitted and list dimensions inside the tray; buy two of the same pack, from the same order if you can, so they start matched.

Biggest capacity that fits on paper

OVONIC 4S 6500mAh 130C (XT60 with Traxxas adapter)

At 159 × 46.5 × 38.5 mm it sits inside all three of Traxxas's tray numbers with room to spare, so you'll be packing the length with the foam blocks rather than forcing it in. The 6500 mAh rating is close to Traxxas's own 6700 mAh recommendation. The catch is the plug: the pack itself is XT60, and the listing includes an XT60-to-Traxxas lead to bridge it. Check the listing for how many packs come in each order, because you need two.

  • Cells4S, 14.8 V
  • Capacity6500 mAh
  • Size (±3 mm)159 × 46.5 × 38.5 mm
  • PlugXT60, plus XT60-to-Traxxas lead
  • Casesoft

Why it stands out

  • Listed size well inside 197 × 51.5 × 45 mm
  • Capacity close to Traxxas's 6700 mAh pick
  • Charge lead is a standard 5-pin balance plug

Think twice if

  • You don't want an adapter between the pack and the ESC on a truck this powerful
Check price on Amazon
Traxxas plug fitted, sold as a pair

Nihewo 4S 6500mAh 80C with Traxxas plug (2 pack)

This is the simplest match on paper: two identical packs in one order, with the Traxxas-style plug already on, so no adapter. Width is the number to watch. The listing says 50 mm with a ±3 mm tolerance, and the X-Maxx tray is 51.5 mm wide, so a pack at the top of the tolerance won't go in. Measure both packs when they arrive. It's also a younger listing than the others, with about 50 ratings.

  • Cells4S, 14.8 V
  • Capacity6500 mAh
  • Size (±3 mm)155 × 50 × 38 mm
  • PlugTraxxas-style
  • Pack2 soft-case packs

Why it stands out

  • Two matched packs per order
  • Traxxas-style plug fitted, no adapter
  • Height (38 mm) under the 45 mm strap limit

Think twice if

  • You can't return a pack that measures over 51.5 mm wide
  • You want an iD pack the charger recognizes automatically
Check price on Amazon
If you also run Arrma

OVONIC 4S 6000mAh 120C EC5 (2 pack)

Worth a look if you already run EC5 packs in an Arrma and want one set of batteries for both trucks. The size is comfortably inside the tray and it comes as a pair. You'd need a Traxxas-to-EC5 adapter or a connector change on the X-Maxx, which is the compromise this whole page warns about, so only go this way if sharing packs matters more to you than a clean connection.

  • Cells4S, 14.8 V
  • Capacity6000 mAh
  • Size (±3 mm)154 × 48 × 34 mm
  • PlugEC5
  • Pack2 soft-case packs

Why it stands out

  • Comfortable fit at 154 × 48 × 34 mm
  • Shares packs with EC5 trucks

Think twice if

  • You only own the X-Maxx; buy a Traxxas-plug pack instead
Check price on Amazon

For EC5 packs, a Traxxas-to-EC5 adapter pair (12 AWG) is the common bridge; its listing rates it at 55 A continuous.

Chargers for a pair of 4S packs

Single 4S iD charger

Traxxas EZ-Peak Plus 4s (2981)

Traxxas's own 4S-capable single charger, and one of the chargers its X-Maxx manual lists. It reads Traxxas iD packs and sets itself up, and its balance port handles conventional packs. The limit is power: 75 W works out to about 4.5 A on a fully charged 4S pack, below 1C for a 6500 mAh pack, and you charge one pack at a time. Fine if you're patient; slow if you run two packs every weekend. For two 4S packs at once, see the EZ-Peak Live Dual in our Traxxas charger guide.

  • LiPo2S to 4S
  • Output75 W, 8 A max
  • iD auto-recognitionyes
  • Storage modeone button

Why it stands out

  • Automatic setup with Traxxas iD packs
  • One-button storage charge

Think twice if

  • You want both packs charged at the same time
Check price on Amazon
Two packs at once

HOTA D6 Pro dual-channel charger

Two channels and a built-in AC supply, so both X-Maxx packs charge side by side from a wall outlet. On AC the 200 W is shared between the channels, which is enough for two 4S packs at a moderate rate; on a DC supply it goes up to 325 W. It doesn't read Traxxas iD chips, so you set the chemistry and current by hand.

  • LiPo1S to 6S
  • Channels2
  • InputAC 100-240 V or DC 6.5-30 V
  • PowerAC 200 W, DC 325 W
  • Current0.5-15 A

Why it stands out

  • Charges both packs together
  • AC or DC input

Think twice if

  • You want automatic setup with Traxxas iD packs
Check price on Amazon

Charge each pack inside its own fire-resistant bag; the Zeee LiPo bag two-pack includes a large bag (9.17 × 8.23 × 6.85 in) big enough for a 4S pack.

Measuring the height of a LiPo pack with a caliper
Check the listing's dimensions against 197 × 51.5 × 45 mm before you buy. Sellers quote ±2 mm tolerances, so don't buy a pack that only fits on paper.

Charging two packs

Charge them as two separate batteries, each on its own charger or its own channel of a dual charger. Traxxas's LiPo warning sheet is blunt about the alternative: "NEVER charge LiPo battery packs in series or parallel." Traxxas recommends its EZ-Peak Live Dual (2973) for the X-Maxx; its manual's charger chart lists the 2971 Live and 2981 Plus 4s as 4S-capable single chargers, and the 2970 and 2972 as 3S only.

Two LiPo packs charging in separate fire-resistant bags
One pack per channel, one bag per pack, on concrete. Start them together so they finish at the same charge level.

The rest of the routine is the same as any LiPo: a charge rate at or below what the label allows (Horizon's safety sheet says 1C unless the maker specifies otherwise), a fire-resistant bag on a non-flammable surface, and someone present the whole time. Our LiPo charging guide walks through it step by step, and the LiPo voltage chart has the storage and cutoff numbers for a 4S pack. If you're shopping for a charger too, our charger guide covers 4S-capable picks, and the best RC car batteries covers smaller trucks.

Who should handle these packs

The X-Maxx manual says the truck "is not intended for use by children or minors under 14 years of age" and that anyone under 18 needs adult supervision; the Ultimate's manual sets the line at 18. Traxxas's manuals also say nobody under 18 should use or handle LiPo packs without a knowledgeable adult. Two 4S packs are a lot of stored energy. The adult does the charging.

What we'd buy

Two matched 4S packs with the Traxxas connector already on them, sized inside 197 × 51.5 × 45 mm, and a charger with two 4S channels. If you already own two identical 3S packs from a 1/10 truck, use them to start; the X-Maxx runs fine on 6S, just slower. Don't split a pair between trucks, and retire both packs together when one starts to puff. If you're weighing the X-Maxx against Arrma's big truck, the Kraton 6S vs X-Maxx comparison covers the battery side too.

Traxxas specifications from the 77096-4 and 77097-4 manuals and traxxas.com; pack specs from Amazon listings, checked October 3, 2026. Prices change, so the buttons show the current price on Amazon. How we research · Affiliate disclosure

Questions people ask

What battery does the X-Maxx use?
Two identical LiPo packs with Traxxas High-Current Connectors. Traxxas recommends two 6700 mAh 4S packs (part 2890X) or the 2997 completer pack, and lists two 5000 mAh 3S packs as the minimum. NiMH isn't supported.
Does the X-Maxx need two batteries?
Yes. The manual says 'Two identical LiPo batteries equipped with Traxxas High Current Connectors are required.' The truck won't run on one, and Traxxas warns against mixing types, capacities or charge levels.
What size battery fits an X-Maxx?
Traxxas's manual gives the compartment as 197 mm long and 51.5 mm wide, 45 mm tall with the stock strap or 28.5 mm with the included hold-down spacer. Packs other than the 6700 mAh 2890X need foam blocks or spacers for a snug fit.
Can I run 6S in an X-Maxx?
Yes. The VXL-8s speed control runs on 4S, 6S or 8S, and two 3S packs make 6S. It's slower: the stock gearing works out to about 31.5 mph theoretical on 6S against 42.1 mph on 8S.
What charger do I need for an X-Maxx?
One that charges 4S packs, and ideally two at once. Traxxas recommends its EZ-Peak Live Dual 2973. Charge each pack on its own channel; Traxxas's LiPo sheet says never to charge packs in series or parallel.
Can I use EC5 or XT90 batteries in an X-Maxx?
Only with adapters or by changing connectors, and you lose Traxxas iD charging. Traxxas tells owners not to change factory connectors on some models and warns that adapters defeat iD charging safety, so a pack with the Traxxas plug already on it is the simpler choice.